mikeric

iTrader: (20)

Alright, we are all Mazda nuts in some respect, but I am not looking for your dimentions.

I have a S4 TII that I am putting in my FB. It came with most of the stuff that I need, minus some important stuff like hardware. An example of what I need are the nuts for the waterpump. What is the thread angle on those? I could just go to the hardware store and start buying random sizes, but I prefer to ask the experts.

Right now, dealing with the waterpump. More to come.

Thanks!

arghx

iTrader: (3)

I think there is a "Master list" thread somewhere with that kind of information, maybe in the archive

mikeric

iTrader: (20)

This is the thread that I was able to find:
https://www.rx7club.com/showthread.p...f+thread+sizes

Is this the Housing Tension Bolt: M10 x 1.0?

lastphaseofthis

iTrader: (8)

m10? that'd be huge! And what the **** is a housing tension bolt? other then one of my favorite 18 bolts that are simply tension bolts.
a 10mm head is a M6
a 12mm head is a M8
A 14mm Head is a M10.
The water pump bolts are 8x1.25.
The pressure plate to flywheel bolts are 8x1.00. Your welcome in advance.

mikeric

iTrader: (20)

Thanks, back to HD to get those now.

mikeric

iTrader: (20)

Alright the nuts worked, but there appears to also be three bolts. Anyone know these specs?

lastphaseofthis

iTrader: (8)

same for the rest of your 12mm head bolts bro, except that of the flywheel.

mikeric

iTrader: (20)

Alright, I did not know they were 12mm as I do not have them. Also, one bolt goes through the housing into the block and the other two look like they just go into the housing so I guess length is important.