Lots of measuring of seals for my rebuild most are well with in spec(pics inside)
#26
Lives on the Forum
iTrader: (8)
where are you learing how to do this rebuild anyways, how do you check what in spec?
BTW, you're doing pretty well thus far, but don't get overconfident, the actual cleaning and assembly is what gets most people.
NEVER reuse apex seals if they have more than 20k miles or so on them. Just say no. They're cheap.
NEVER reuse water seals at all.
Don't worry about the rubber cornerseal plugs...they have no real effect on compression, and serve no real purpose after 10-20k miles anyway. I see them as a waste of money.
Other than that, carry on.
#28
Full Member
Join Date: Oct 2002
Location: spring hill, tennessee
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by scheistermeister
kevin, it looks like you may have some competition in a few years hehe
i gotta give you props kid, im 18 and still havent gotten around to rebuilding one.
hope everything goes good, theres plenty of people on here to help if needed, just like kevin
#30
Eats, Sleeps, Dreams Rotary
Thread Starter
Well all my info has come from haynes manual,FSM, Atkins rotary rebuild tape, Dan atkins,Kevin landers and the fourm.. i only play to reuse the sideseals,cornerseals,oil rings(not the oil ring o ring insert)Side seal springs.. the rest i plan to get new
#31
Eats, Sleeps, Dreams Rotary
Thread Starter
also i frogot one major player in my rebuild that is DDUB on the forum.... he has helped me a major amount through talking on aim... if it wernt for him it probably wouldent be happeing
Thanx
Thanx
Last edited by felixwankel88; 01-24-05 at 03:15 PM.
#32
i am legendary
Originally Posted by felixwankel88
also i frogot one major player in my rebuild that is DDUB on the forum.... he has helped me a major amount through talking on aim... if it wernt for him it probably wouldent be happeing
Thanx
Thanx
But credit must once again be given as everything I've learned has come through the Atkins video, reading nopistons, and bothering Kevin Landers with idiotic questions on the quest for knowledge
#37
Eats, Sleeps, Dreams Rotary
Thread Starter
i plan to be ordering the new
-corner seal plugs
-fd corner springs
-Atkins thermal pellet
-hylomar
- used in spec e-shaft
all hope fully tonight... then i must save and save...for my other parts
-corner seal plugs
-fd corner springs
-Atkins thermal pellet
-hylomar
- used in spec e-shaft
all hope fully tonight... then i must save and save...for my other parts
#39
Eats, Sleeps, Dreams Rotary
iTrader: (1)
e-shafts dont really get out of spec too easily unless something really crazy happened
wow im impressed, im 20 and getting my 3rd rx-7 but havent even worked on my cars a whole lot. however my newest is a turbo ii and i plan on doing a lot of work, along with building up a spare engine.
man, congratulations
what i want to know is how have you owned 4 fcs so far? your parents must have a huge backyard
good job!@$
you're alot better than the last fifteen year old i remember on the forum, he was only fif-*******-teen
wow im impressed, im 20 and getting my 3rd rx-7 but havent even worked on my cars a whole lot. however my newest is a turbo ii and i plan on doing a lot of work, along with building up a spare engine.
man, congratulations
what i want to know is how have you owned 4 fcs so far? your parents must have a huge backyard
good job!@$
you're alot better than the last fifteen year old i remember on the forum, he was only fif-*******-teen
Thread
Thread Starter
Forum
Replies
Last Post