Let's have a good ol' fashioned debate... Subject: Gauges.
#28
long live the monster BP
Join Date: Nov 2005
Location: New Zealand
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Longshoe
boost pressure, AFR, and fuel pressure
+1
all the info you need. Why double up. just replace your stock sensors and wiring if your worried.
#29
Rotary Freak
iTrader: (14)
I just finished ordering the pineapple racing Dual EGT gauge about 5 minutes ago. I think those will defintly help save your engine. Like stated above a A/F wideband is good but it only tells you the average A/F from both chambers. With the dual EGT gauge you can tell if just one rotor is leaning out or whats going on.
#30
Rotaries confuse me
iTrader: (7)
For my N/A I was thinking...
Oil Pressure
Water Temp
Oil Temp
and maybe...
Fuel Pressure
A wideband and EGT would be kind of cool to have, but not really useful. Nothing I would spend money on. Of course, I can always switch them to a TII when I get one. But... I need money for that first.
Oil Pressure
Water Temp
Oil Temp
and maybe...
Fuel Pressure
A wideband and EGT would be kind of cool to have, but not really useful. Nothing I would spend money on. Of course, I can always switch them to a TII when I get one. But... I need money for that first.
#31
The Cause of Death
Originally Posted by FrankV702
I just finished ordering the pineapple racing Dual EGT gauge about 5 minutes ago. I think those will defintly help save your engine. Like stated above a A/F wideband is good but it only tells you the average A/F from both chambers. With the dual EGT gauge you can tell if just one rotor is leaning out or whats going on.
I don't really get it...
James
#33
The Cause of Death
Originally Posted by 88rxn/a
i think its 2 probes...that go BEFORE the turbo.
Must only work with an aftermarket or custom exhaust manifold, right?
James
#34
Rotary Freak
iTrader: (14)
I havnt gotten it yet.. Just put the order in for it a few minutes ago.. should be here by this weekend. But its not wideband O2sensors..This kit comes with two probes (kind of like water temp probes) that tell you how hot the exhaust gasses are. You have to tap (1) 1/8" NPT in each of the exhaust manifold runners, Then you screw the probes into each one. As seen in the pics below of my manifold. The lil brown spray paint circles is where ill tap the fittings to screw in the two probes.
#35
tom port.. AKA streetport
iTrader: (6)
Join Date: Jan 2005
Location: ludlow, pa
Posts: 4,659
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by spot_skater
Ah... So they would each go in the runners of the exhaust mani and before the turbo then?
Must only work with an aftermarket or custom exhaust manifold, right?
James
Must only work with an aftermarket or custom exhaust manifold, right?
James
they had a group buy a little while ago and i missed it!
https://www.rx7club.com/pineapple-racing-171/pineapple-racing-hi-temp-dual-egt-gauge-kit-560258/
#37
Crash Auto?Fix Auto.
iTrader: (3)
My top 2 picks:
Oil pressure (if the stock one works, I'd keep it. I basically use it as a warning light. If its dad in the water I know somethings up.....but if it doesn't work - you NEED this gauge or a warning light.)
Water temp. For me in the S4 TII I'm using the stocker because it works, and unlike the S5 has a much more healthy pallate to view from. In the S5, once its past half - you've probably already done some damge. At least, thats been my experience. But again - if you don't have this - you NEED it.
Really, this is all you need if you're going to be a true minimalist. But a boost gauge will help since you will be running a T4, I'd want to keep an eye on boost levels.
But my spread in my car is as follows:
Stock oil press.
Stock water temp.
AEM wideband----->a-pillar
Boost----->a-pillar
PR Dual EGT----->in the door vent
No clutter in the center section at all. The only thing I would liek to get eventually would be an oil temp. gauge.............but I'm out of "un-used" real-estate in the cabin at the moment.
Oil pressure (if the stock one works, I'd keep it. I basically use it as a warning light. If its dad in the water I know somethings up.....but if it doesn't work - you NEED this gauge or a warning light.)
Water temp. For me in the S4 TII I'm using the stocker because it works, and unlike the S5 has a much more healthy pallate to view from. In the S5, once its past half - you've probably already done some damge. At least, thats been my experience. But again - if you don't have this - you NEED it.
Really, this is all you need if you're going to be a true minimalist. But a boost gauge will help since you will be running a T4, I'd want to keep an eye on boost levels.
But my spread in my car is as follows:
Stock oil press.
Stock water temp.
AEM wideband----->a-pillar
Boost----->a-pillar
PR Dual EGT----->in the door vent
No clutter in the center section at all. The only thing I would liek to get eventually would be an oil temp. gauge.............but I'm out of "un-used" real-estate in the cabin at the moment.
#41
tom port.. AKA streetport
iTrader: (6)
Join Date: Jan 2005
Location: ludlow, pa
Posts: 4,659
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FrankV702
thats tip money haha.. my desk is sooooo cluttered. I got 3 turbos on it.. 2 manifolds.. a hole bunch of rad clamps and Tbolt clamps.. money.. photo printer and digital camera. lol. and papers out the ***..
tips!?!?!?
what the hell are you!?!?!
a pole dancer!!!
#42
The Cause of Death
Can be used with the stock exhaust mani then for a stock turbo, or for when a turbo upgrade is in order? Sounds pretty sweet!
Good stuff... and I don't see why it couldn't be used with the Haltech... As long as you have enough inputs for it.
I am interested, as well.
James
Good stuff... and I don't see why it couldn't be used with the Haltech... As long as you have enough inputs for it.
I am interested, as well.
James
#43
i vote for no extra guages....get a haltech, and a laptop...monitor everything on the laptop and take it with u when u get out of the car...nto guages to attract those theives
#44
On the prowl for an FB
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Surrounded by Sebey parts, Rhode Island
Posts: 2,932
Likes: 0
Received 6 Likes
on
4 Posts
Originally Posted by osiris7442
i vote for no extra guages....get a haltech, and a laptop...monitor everything on the laptop and take it with u when u get out of the car...nto guages to attract those theives
#46
On the prowl for an FB
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Surrounded by Sebey parts, Rhode Island
Posts: 2,932
Likes: 0
Received 6 Likes
on
4 Posts
Originally Posted by FrankV702
Im working on fabbing my own.. If anyone has a extra FC gauge cluster they want to sell for cheap it should be done quicker then im expecting . microtech you should be able to monitor that stuff as well..
#50
Play Well
Join Date: Feb 2005
Location: We're all fine here now, thank you. How are you?
Posts: 4,218
Likes: 0
Received 0 Likes
on
0 Posts
I have 2 bezel gauges. Water and oil temp, I think temp is more important than pressure because if the pressure drops the temp is going to go up.