Just got the world's ugliest 'vert. Ever.
#26
89 Turbo II
Join Date: Jan 2005
Location: Oklahoma City
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by twincannon26
...spoiler off an old buick or something...
That is the rear wind deflector off of an old chevy s-10 blazer...I had a friend do that to his cavalier and we made fun of him forever!
#27
Como Frejoles?
Join Date: Jul 2004
Location: Jacksonville, Fl
Posts: 615
Likes: 0
Received 0 Likes
on
0 Posts
We got ours free, but it was faded pretty bad, the radio bezel is broken and the seats are ripped. Those leather seats look 1000 times better. Our top is ripped too. The interior was green (mildew) and the engine was colored grease. We finally got the paint buffed out pretty good, the engine compartment is cleaned up a little. Seat covers on the seats until new covers are ordered, and the top is not been touched yet. Exhaust leaks like crazy and one muffler completely rusted off.
I drive it to work everyday.
Your car has alot of potential. it is not as bad as you make it out to be. I have seen alot of people sink big buck into cars that Should have been crushed long ago.
A little elbo grease....
Later,
Bill
I drive it to work everyday.
Your car has alot of potential. it is not as bad as you make it out to be. I have seen alot of people sink big buck into cars that Should have been crushed long ago.
A little elbo grease....
Later,
Bill
#28
On the prowl for an FB
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Surrounded by Sebey parts, Rhode Island
Posts: 2,932
Likes: 0
Received 6 Likes
on
4 Posts
Originally Posted by mazdaverx713b
car looks decent at best. who cares what you paid for it. some people dont know its rude to inquire about things like that time and time again.
do you happen to have any engine shots?
have you driven the car at all?
the passenger seat doesnt look that bad. why are you scrapping it?
what does the wife think?
#29
On the prowl for an FB
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Surrounded by Sebey parts, Rhode Island
Posts: 2,932
Likes: 0
Received 6 Likes
on
4 Posts
More pics:
I don't know what this black stuff is, I'm assuming it will wash off, though.
Front pass fender dent:
At least I cleaned the wheels.
I don't know what this black stuff is, I'm assuming it will wash off, though.
Front pass fender dent:
At least I cleaned the wheels.
#33
Former Moderator. RIP Icemark.
Originally Posted by $100T2
The other side of the trunk:
#34
On the prowl for an FB
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Surrounded by Sebey parts, Rhode Island
Posts: 2,932
Likes: 0
Received 6 Likes
on
4 Posts
Originally Posted by Icemark
Looks like it is missing almost all the trunk trim parts or did you take them out already?
#37
Driving RX7's since 1979
iTrader: (43)
Join Date: Aug 2001
Location: So Cal where the OC/LA/SB counties meet
Posts: 6,096
Likes: 0
Received 9 Likes
on
9 Posts
"The trunk struts won't hold it open, either."
With an adapter, you can replace the trunk struts with aftermarket. Probably just need to replace one strut as the aftermarkets are pretty strong. Adapter is about $20 and the strut (depending on where you get is) runs between $27-$35.
With an adapter, you can replace the trunk struts with aftermarket. Probably just need to replace one strut as the aftermarkets are pretty strong. Adapter is about $20 and the strut (depending on where you get is) runs between $27-$35.
#39
Full Member
Join Date: Mar 2006
Location: long island
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
hey check if u have tail lights, if those dont work then its usually either a fuse (located drivers side to the left of the clutch petal) or a switch. if ur tail lights do work then its a dash bulb or wiring.
#41
hey, sounds like you may have some takers on those looney toones floor mats...... snap-on sells a tool that will clamp onto your trunk strut and keep it held in place while your work. i believe they're made by cen-tech. i have a few at work and one at home to help out in the garage. did something happen to your gxl??
#43
Dork
Join Date: Sep 2006
Location: Cedar Rapids, Iowa
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
You're gonna need to strip the paint and hit it with POR15. Bullet proof.
What about the engine? That is the most important part. (Those poor saps who swap in a V8 and think it is still a 7, sigh)
Every 7 that can be saved, must be saved. If the frame is totally FUBAR, transplant. Thus spoke god...lol. But thank you for keeping another one on the road.
What about the engine? That is the most important part. (Those poor saps who swap in a V8 and think it is still a 7, sigh)
Every 7 that can be saved, must be saved. If the frame is totally FUBAR, transplant. Thus spoke god...lol. But thank you for keeping another one on the road.
#45
Passing life by
Originally Posted by $100T2
Plans? Hopefully to clean it up so my GF can drive it around. She loves 7s now, and wanted a 'vert, so it's really going to be hers.
#46
Como Frejoles?
Join Date: Jul 2004
Location: Jacksonville, Fl
Posts: 615
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sniperstevedave
What about the engine? That is the most important part. (Those poor saps who swap in a V8 and think it is still a 7, sigh)
.
.
Why not just call the car a Rotary or a Wankel?? Why do people insist on arguing over this? Oh, I see, the cars style, weight, and handling have nothing to do with it being a great car. Every time I come on to this board I can see at the very top that it says in plain English: "RX-7 Owners Club" not "Rotary Owners Club" or even "Rotary RX-7 Owners Club."
So, it is not a 7 without the Rotary, is it? Just what exactly is it then?? Get over it dude. Some people like Rotary's, some people like pistons. Who cares? If you are not paying the money for it then you really have no say in the matter. You just like stirring the pot!
I like the 13B in the vert. It has been pretty dependable. The 12A in the FB has been nothing but problems. Now it doesn't run because of 2 little pieces of plastic that cost over $200 each. A v8 is in its way into the FB, and if the 13B ever dies, it may or may not be replaced with a v8, Depending on the cost of each.
I have no problems with people who like original engines in thier cars. I also have no problem with swapping them out for something else, ie, v8, v6, i4, i6, 20B, etc.
I think you should have posted: " It would be great if the engine is running good so you have an all original car, if that is what you want."
[Rant Off]
Sorry to hijack you thread, I just irks me everytime I hear this garbage^^^. I say great car, and I hope that it turns out just how you and your gf like.
Later,
Bill
#47
Dork
Join Date: Sep 2006
Location: Cedar Rapids, Iowa
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Didn't mean to **** anyone off. Its just that the rotary engine is a big part of what makes the RX unique compared to all the other cars you see on the road. You change it to a piston engine, you lose that (plus heavy V8s will tend to mess with the weigh distribution). No offense, no insults intended. I just want to see more rotary powered cars on the road is all.
Your GF is lucky-that's gonna be a great car.
Your GF is lucky-that's gonna be a great car.
#48
Como Frejoles?
Join Date: Jul 2004
Location: Jacksonville, Fl
Posts: 615
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by sniperstevedave
Didn't mean to **** anyone off. Its just that the rotary engine is a big part of what makes the RX unique compared to all the other cars you see on the road. You change it to a piston engine, you lose that (plus heavy V8s will tend to mess with the weigh distribution). No offense, no insults intended. I just want to see more rotary powered cars on the road is all.
Your GF is lucky-that's gonna be a great car.
Your GF is lucky-that's gonna be a great car.
You are correct, Rotary's are unique and different. That is why I like them. I respect your viewpoint from that perspective. For me it is the whole package. If the whole package doesn't work well (for me) then I change the part that doesn't work the way I want it. This is why even with rotary engines, people are always modding them in one way or another, like porting, turbo's, exhaust, etc. I just take that one step further to the whole package. I am modding the package.
V8s do mess with the weight distribution. Most LS1 FD cars are lighter in the front than in the rear. Go figure.
I just saw Directfreaks 685 RWHP vid and that car is awesome. I like anything that people fix up.
Alright, Back to topic. If you need some pics of the trunk space, let me know, Mine isn't in perfect shape, but I think everything is there.
Later,
Bill
#49
Hopeful Future
Join Date: Oct 2005
Location: Orlando, FL
Posts: 791
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by SSRx7
Why not just call the car a Rotary or a Wankel?? Why do people insist on arguing over this? Oh, I see, the cars style, weight, and handling have nothing to do with it being a great car. Every time I come on to this board I can see at the very top that it says in plain English: "RX-7 Owners Club" not "Rotary Owners Club" or even "Rotary RX-7 Owners Club."
So, it is not a 7 without the Rotary, is it? Just what exactly is it then?? Get over it dude. Some people like Rotary's, some people like pistons. Who cares? If you are not paying the money for it then you really have no say in the matter. You just like stirring the pot!
I like the 13B in the vert. It has been pretty dependable. The 12A in the FB has been nothing but problems. Now it doesn't run because of 2 little pieces of plastic that cost over $200 each. A v8 is in its way into the FB, and if the 13B ever dies, it may or may not be replaced with a v8, Depending on the cost of each.
I have no problems with people who like original engines in thier cars. I also have no problem with swapping them out for something else, ie, v8, v6, i4, i6, 20B, etc.
I think you should have posted: " It would be great if the engine is running good so you have an all original car, if that is what you want."
[Rant Off]
Sorry to hijack you thread, I just irks me everytime I hear this garbage^^^. I say great car, and I hope that it turns out just how you and your gf like.
Later,
Bill
So, it is not a 7 without the Rotary, is it? Just what exactly is it then?? Get over it dude. Some people like Rotary's, some people like pistons. Who cares? If you are not paying the money for it then you really have no say in the matter. You just like stirring the pot!
I like the 13B in the vert. It has been pretty dependable. The 12A in the FB has been nothing but problems. Now it doesn't run because of 2 little pieces of plastic that cost over $200 each. A v8 is in its way into the FB, and if the 13B ever dies, it may or may not be replaced with a v8, Depending on the cost of each.
I have no problems with people who like original engines in thier cars. I also have no problem with swapping them out for something else, ie, v8, v6, i4, i6, 20B, etc.
I think you should have posted: " It would be great if the engine is running good so you have an all original car, if that is what you want."
[Rant Off]
Sorry to hijack you thread, I just irks me everytime I hear this garbage^^^. I say great car, and I hope that it turns out just how you and your gf like.
Later,
Bill
well, technically RX-7 means Rotary Experiment 7 doesnt it?
but anyway, damn lol thats a project, post up pics and updates on how she progresses.
#50
I Dislike Everything
iTrader: (1)
Join Date: Apr 2002
Location: St. Louis/Southern Illinois
Posts: 3,701
Likes: 0
Received 7 Likes
on
7 Posts
Rotary Experiment 7 is a myth. RX-7 is just a catchy name, like the CX-7, 240sx, 300sx, etc.
And sorry to say, but the weight distrubution does not get messed up when swapping in a V8 into an FD. You actually LOSE weight, because you have to figure in the turbo system on the FD's. There's ALOT of craph in there.
And sorry to say, but the weight distrubution does not get messed up when swapping in a V8 into an FD. You actually LOSE weight, because you have to figure in the turbo system on the FD's. There's ALOT of craph in there.