Just Finished Rebuild!!!! Before And After PICS!!!! LOTS!!!!
06-01-05, 07:52 PM
#26
Mechanical Engineering
Originally Posted by Mr. Gadget
Sorry for the poor quality. dig camera at work, had to use my treo camera.
But look at that shine -BLING! BLING!
But look at that shine -BLING! BLING!
i gotta try that next time i decide to dive into a rotary engine thinking nothing is seriously damaged.
06-01-05, 08:05 PM
#27
Older than Dirt
Join Date: May 2003
Location: Parts Unknown
Posts: 1,448
Likes: 0
Received 0 Likes
on
0 Posts
thats it guys, I keep about 8 gallons in one parts cleaner use it more like a soaking tank. As long as you ahve a few days to cycle through the parts, it takes all the elbow grease out of the process.
06-01-05, 09:08 PM
#28
Mechanical Engineering
Originally Posted by Mr. Gadget
thats it guys, I keep about 8 gallons in one parts cleaner use it more like a soaking tank. As long as you ahve a few days to cycle through the parts, it takes all the elbow grease out of the process.
i wish i knew that before because i used one of the many broken apex seals that i have to scrape the carbon out of the grooves. man it was so annoying
06-01-05, 09:35 PM
#30
Rotors? What Are Those?
Thread Starter
iTrader: (6)
Join Date: Jul 2003
Location: Jefferson City, Tn
Posts: 2,601
Likes: 0
Received 0 Likes
on
0 Posts
Wow huge difference to late now =( but i just finished painting the housings installed the OMP system, and some misc junk i need the waterpump gaskset and LIM gasket to fnish it all off but should come out good.....when i turn the motor over manually now it lets out some really good pulses of air but all depends on the day i turn it on....
TwEaK
TwEaK
06-02-05, 12:00 AM
#31
I live in an igloo
Join Date: Jul 2004
Location: calgary alberta
Posts: 2,546
Likes: 0
Received 0 Likes
on
0 Posts
SO with this simple green or purple power, theres no way that you just let it sit in a still tub and it turns out like that, right? I mean I had to scrub and scrub to get my parts ******* clean, it was rediculous, there has to be an easier way to disolve sludge and grease.
06-02-05, 06:13 AM
#32
Older than Dirt
Join Date: May 2003
Location: Parts Unknown
Posts: 1,448
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BlaCkPlaGUE
SO with this simple green or purple power, theres no way that you just let it sit in a still tub and it turns out like that, right? I mean I had to scrub and scrub to get my parts ******* clean, it was rediculous, there has to be an easier way to disolve sludge and grease.
06-03-05, 12:58 AM
#34
Haven't we ALL heard this
Man , I don't know about powder coating a rotor housing...its alloy....dosen't powder coating do bad things to alloy rims?
I used a brass wire wheel on my rotor....worked great.
Dude, that one rotor is amazing...i think it is a new one
James
I used a brass wire wheel on my rotor....worked great.
Dude, that one rotor is amazing...i think it is a new one
James
Thread
Thread Starter
Forum
Replies
Last Post
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM