Rotarythekiller

Is the diameter of an integra cold air the same size as the intake manifold on the rx?

Stanello

iTrader: (1)

I don't understand what you are asking.

Rotarythekiller

i was told that there isnt a intake for a gen2 and that an integra intake would be the best choice with very little mods to it. i was just wondering if the integra cold air pipe will just fit right on or will i have to decrease the diameter of the pipe to fit.

Zokus

Corksport sells one. But you don't need it.

Jager

iTrader: (10)

It's not an integra intake, it's a 92-96 Prelude intake that can be made into the cold air. Many people do the prelude intake because its cheaper then Mariah, it works, and that it's simple and easy.

The piping on the Prelude intake is 3", you'll need either a home depot 3" to 3" coupler OR rubber/silicone 3.5" to 3" coupler. You will use that coupler to adapter it to the TB adapter (black rubber peice infront of the RB).

Good luck m8.

Jager

iTrader: (10)

The Auto Exe one?

The only other I'm aware of is their "intake" pipe. It's hardly cold air, just a replacement pipe for the stock rubber peice.