Injectors not firing need help
04-11-06, 11:39 PM
#1
Full Member
Thread Starter
Join Date: Oct 2005
Location: Federal Way
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Injectors not firing need help
Put the omp back on, started up fine. Then we turned off the car, and cranked it again but now it wont start. The fuel travels through the fuel rail, but i dont think its going into the fuel injectors. I pulled my spark plugs, and cranked it to see if any gas was coming out and nothing was spraying out. I dont know what to do. Please help me!!
04-12-06, 09:53 AM
#2
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 110 Likes
on
93 Posts
Are you SURE they are not firing? Have you listened to them click with a stethescope?
If they really aren't firing, then check the plug for 12V on one of the terminals. If not present, then check your injector resistor pack. Make sure the AFM is plugged in.
If you have spark, you should have injectors.
If they really aren't firing, then check the plug for 12V on one of the terminals. If not present, then check your injector resistor pack. Make sure the AFM is plugged in.
If you have spark, you should have injectors.
04-13-06, 07:24 PM
#3
Full Member
Thread Starter
Join Date: Oct 2005
Location: Federal Way
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Aaron Cake
Are you SURE they are not firing? Have you listened to them click with a stethescope?
If they really aren't firing, then check the plug for 12V on one of the terminals. If not present, then check your injector resistor pack. Make sure the AFM is plugged in.
If you have spark, you should have injectors.
If they really aren't firing, then check the plug for 12V on one of the terminals. If not present, then check your injector resistor pack. Make sure the AFM is plugged in.
If you have spark, you should have injectors.
My injecotrs pulse, i get fuel pressure. I dont know what else could be wrong. I removed the spark plugs cranked it over to see if any gas comes out and nothing. It travels through the fuel rail but looks like it dosent go into the injecotrs.
04-13-06, 07:33 PM
#4
The Shogun of Harlem
iTrader: (2)
Join Date: Jul 2005
Location: Jonesboro, Georgia
Posts: 420
Likes: 0
Received 0 Likes
on
0 Posts
Ive got this exact same issue and am wondering if there is an easy way to check if primary injectors are getting power. Or if it is possible to check if the secondary injectors in their place (which id assume isnt likely, id just really hate to have to take the UIM off again).
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
Adaptronic 1280s Hot Start 3 Rotor 20b RX7
Monsterbox
Adaptronic Engine Mgmt - AUS
5
09-11-15 03:29 PM
windom
Adaptronic Engine Mgmt - AUS
4
09-11-15 04:48 AM