Injector question
08-20-05, 04:31 PM
#1
rawr
Thread Starter
iTrader: (2)
Join Date: Feb 2001
Location: Silver City, NM
Posts: 2,331
Likes: 0
Received 0 Likes
on
0 Posts
Injector question
ive searched the forum and looked in the FSM's and cant find the information i need.
im putting my car back together and just realized that all my S4 injectors have broken pintle caps. i have some S5 injectors that were cleaned ~20k miles ago and am going to put them in, i have the S5 connectors with quite a bit of wire at the end, so im going to splice them into the S4 wiring harness, the question is, what wires do i hook to what?? do i plug in the S4 injectors and use the wire that is going to the same terminal on the S5's?? it seems logical but i wanted to make sure. thanks
im putting my car back together and just realized that all my S4 injectors have broken pintle caps. i have some S5 injectors that were cleaned ~20k miles ago and am going to put them in, i have the S5 connectors with quite a bit of wire at the end, so im going to splice them into the S4 wiring harness, the question is, what wires do i hook to what?? do i plug in the S4 injectors and use the wire that is going to the same terminal on the S5's?? it seems logical but i wanted to make sure. thanks
08-20-05, 11:37 PM
#3
Lives on the Forum
Too much trouble for what it's worth...
Break the rest of the pintle caps and throw it in the trash.
You don't need them.
It helps to have "fresh" lower grommet to help them seat better.
-Ted
Break the rest of the pintle caps and throw it in the trash.
You don't need them.
It helps to have "fresh" lower grommet to help them seat better.
-Ted
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM