idle problem, but different
#1
Full Member
Thread Starter
Join Date: Dec 2002
Location: Tampa, Florida/The hill
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
idle problem, but different
hey whats up, im kinda new here, i tried to seach but nothing helped me. ok here is my problem, my car starts up, and when it is cold it idles steady at about 950rpm
( i know its a little high, but o well). but then when my car warms up the idle starts to jump, like somewhat bad, but it stops the second i put my a/c on, and will start again if i turn it off, please help, thanks in advance for you help
( i know its a little high, but o well). but then when my car warms up the idle starts to jump, like somewhat bad, but it stops the second i put my a/c on, and will start again if i turn it off, please help, thanks in advance for you help
#3
Refined Valley Dude
Join Date: Oct 2001
Location: Kitchener, Ontario (Hamilton's armpit)
Posts: 2,283
Likes: 0
Received 2 Likes
on
2 Posts
Originally posted by Amur_
Checking the BAC:
https://www.rx7club.com/forum/showth...&highlight=BAC
Cleaning the BAC:
http://fc3s-pro.com/TECH/PROBLEMS/EM/bac.htm
Btw, have you checked your TPS?
http://fc3s-pro.com/TECH/HOWTO/TPS/tps.html
(It's shown being done on a TII, but the technique is the same for NAs.)
Checking the BAC:
https://www.rx7club.com/forum/showth...&highlight=BAC
Cleaning the BAC:
http://fc3s-pro.com/TECH/PROBLEMS/EM/bac.htm
Btw, have you checked your TPS?
http://fc3s-pro.com/TECH/HOWTO/TPS/tps.html
(It's shown being done on a TII, but the technique is the same for NAs.)
#5
Refined Valley Dude
Join Date: Oct 2001
Location: Kitchener, Ontario (Hamilton's armpit)
Posts: 2,283
Likes: 0
Received 2 Likes
on
2 Posts
New - dealership. $$$
Used - try www.rx7world.com or pm hypntyz7 or Icemark (one of them may have a spare kicking around.)
Don't know what a fair price is - I've never bought a used one. Don't pay more than $300.
Used - try www.rx7world.com or pm hypntyz7 or Icemark (one of them may have a spare kicking around.)
Don't know what a fair price is - I've never bought a used one. Don't pay more than $300.
#6
Full Member
Thread Starter
Join Date: Dec 2002
Location: Tampa, Florida/The hill
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
well im going to try and fix it first, since im only 15 and i dont have 300 bucks to blow on a part that isnt absolutly needed. but i will try to look for one around here, if any1 has one please tell me. thank you very much
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM