I give up, GXL for sale.
#1
Super Raterhater
Thread Starter
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,630
Likes: 0
Received 3 Likes
on
3 Posts
I give up, GXL for sale.
Alright, I've lost all interest and/or faith in my GXL conversion. It just won't run no matter what I do to it, and I'm tired of screwing with it only to find out I've been screwed over more and more by some ******* who think's it's funny to sell people blown engines and then not take them back. Anyway, for anyone who's interested, it's for sale in the for sale section with pictures. If I don't get a resonable offer, I'll just drop a 350 in it and sell it locally. Thanks for all the help, but I just can't take it anymore.
#6
Super Raterhater
Thread Starter
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,630
Likes: 0
Received 3 Likes
on
3 Posts
Hah, when I got the engine, the compression was 20-20-20 in the front rotor! I've since tried to rebuild it, and right now it's running 85-90-90 or so from the pulses, but since the guy also declined to tell me he put all series 4 parts on a series 5 engine (including the PULLEY with the CORRECT timing marks) I'm sort of screwed, because I have no idea where the hell the timing marks are. If you want to know, pm me, I'm tired of bringing this up in public.
#7
Full Member
Join Date: Mar 2002
Location: Oklahoma City, OK
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Well, there is a way to solve the timing problem you are having. I feel for you man, really, I've had SOO many problems with my T2 conversion. I'm finally getting mine ironed out though. Big *** Fuel pump was dumping far too much gas into the engine for me to get the car to idle right. i switched to a stock pump and it seems to do fine now. So I guess I gotta get a fuel controller to run the Walbro correctly. Just something to think about.
Trending Topics
#8
Super Raterhater
Thread Starter
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,630
Likes: 0
Received 3 Likes
on
3 Posts
I'm running a stock T2 pump. It won't start on it's own, it takes almost an hour of playing to get it to start, and then when it does it won't idle below 2K rpm, otherwise it just stalls and dies. I'm tired of all the damn problems, I just don't care anymore. I've never had anyone rip me off until I got the rx7, hopefully it'll go away with it.
#10
Full Member
Join Date: Mar 2002
Location: Oklahoma City, OK
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Funny thing about this. I searched and it appears that you have only been working on your conversion for 3 months! Did you expect to be able to just plug everything in and go? Especially, if this is the first rotary swap you've done. Mine has taken upwards of six months now. It has been a BITCH too, but I live in Oklahoma where there are like 3 rx7's in the whole state and NO rotary shops. I've had to figure out everything on my own, with little advice from people hundreds of miles away that know little about my specific car. Not trying to give you a hard time but it seems like you are giving up kinda easy.
As far as getting ripped off, you are the first person I've ever heard say that about ***** and I've dealt with him several times.
As far as getting ripped off, you are the first person I've ever heard say that about ***** and I've dealt with him several times.
#11
Laying Down Rotary Law
Yea it's getting tiring now with people (rx7 owners)
ripping off others...
I havn't quite giving up yet
But buying off ebay almost exclusive now
only buying from ebay uers with 5 plus+ feedbacks
did you add the TII injector resistor pack?
ripping off others...
I havn't quite giving up yet
But buying off ebay almost exclusive now
only buying from ebay uers with 5 plus+ feedbacks
did you add the TII injector resistor pack?
Last edited by kabooski; 06-18-02 at 08:12 PM.
#12
White Comet
Join Date: Jan 2002
Location: Orange County
Posts: 2,145
Likes: 0
Received 0 Likes
on
0 Posts
I know exactly how you feel. Mines stock and im fighting an uphill battle againist **** that keeps breaking. Ive only had it for about 2 and a half months but no matter how much **** I fix something else breaks.
#13
Alcohol Fueled!
iTrader: (2)
Originally posted by kabooski
Yea it's getting tiring now with people (rx7 owners)
ripping off others...
I havn't quite giving up yet
But buying off ebay almost exclusive now
only buying from ebay uers with 5 plus+ feedbacks
did you add the TII injector resistor pack?
Yea it's getting tiring now with people (rx7 owners)
ripping off others...
I havn't quite giving up yet
But buying off ebay almost exclusive now
only buying from ebay uers with 5 plus+ feedbacks
did you add the TII injector resistor pack?
#14
New Project on the Way...
iTrader: (2)
well i was also ripped off by a forum member! and well he has no remorse! But i mean i dealt with it and am now on the road to success! as i am not leaning toward a faster car with new turbo and s-afc.. and quite a few other mods! But good luck whether you decide to sell or to fix!
#15
Super Raterhater
Thread Starter
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,630
Likes: 0
Received 3 Likes
on
3 Posts
Six month for a conversion? What are you imagining is so difficult? It's quite easy, if it weren't for the blown engine, and all the wrong damn engine parts, this car would've been done months ago. I've got about $2,000 tied up in this engine alone, from switching all of his series 4 stuff back to series 5 like it should be, however, I still can't find the right pulley, which has been most of my problem. As I said, I've never been screwed over an any deal until I got this rx7, and now it's happened around 4 times. The conversion was unbelievably easy. If I had a decent motor that wasn't a constant guess-work, I'd of been set from the begining.
#16
What R U thinking self?
Join Date: Mar 2002
Location: Stockton, CA
Posts: 2,333
Likes: 0
Received 0 Likes
on
0 Posts
It can't be that hard to get a pulley.
Try Mazda auto recycling or
Mazda Auto dismantling
both in Rancho Cordova, CA they carry a **** load of used RX parts.
Try Mazda auto recycling or
Mazda Auto dismantling
both in Rancho Cordova, CA they carry a **** load of used RX parts.
#18
What R U thinking self?
Join Date: Mar 2002
Location: Stockton, CA
Posts: 2,333
Likes: 0
Received 0 Likes
on
0 Posts
they have ECU's also .. They have hundreds I'm sure they will let one go cheap. Buy all you parts from them at one time they will cut you a deal. I bought my whole auto to manual tranny mod from them for my N/A for a very fair price.
Plus do to your bad luck they warranty ANY part for 6 months. If a used part is going to fail, its prolly going to fail within 6 months.
Plus do to your bad luck they warranty ANY part for 6 months. If a used part is going to fail, its prolly going to fail within 6 months.
#19
Super Raterhater
Thread Starter
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,630
Likes: 0
Received 3 Likes
on
3 Posts
The problem is, I'm broke, I'm beyond tired of even trying anymore, and I'm tired of all the thing's people sell me not working. Of course I can get another ECU or pulley, but I don't really even want to bother with it anymore.
#20
What R U thinking self?
Join Date: Mar 2002
Location: Stockton, CA
Posts: 2,333
Likes: 0
Received 0 Likes
on
0 Posts
I don't know what to say then. I hope you have a daily driver. If you have a daily... take a break, the value of your car is not going to go down. If in a few months if you still don't want to mess with it, then sell it.
Thats what i would do. It's kinda like a woman... you get pissed and say "**** her" but then ... you go without long enough, you crawl back to her
Thats what i would do. It's kinda like a woman... you get pissed and say "**** her" but then ... you go without long enough, you crawl back to her
#21
Super Raterhater
Thread Starter
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,630
Likes: 0
Received 3 Likes
on
3 Posts
I'm not too sure about that one. If my woman was anything like this car, I'd of turned gay or something. I have 3 other cars I can drive around, so I'm not too worried, I'm just tired of it.
#22
What R U thinking self?
Join Date: Mar 2002
Location: Stockton, CA
Posts: 2,333
Likes: 0
Received 0 Likes
on
0 Posts
I can't count how many times I have been up at 2am trying to get "one last" thing done before I get some sleep. I plug away and plug away for hrs on end, untill I just about break somthing ... then I wake up fresh in the morning and it takes me 5 minutes to do what was taking Hrs to not get done the nite before. Its just burn out... yours is alonger term burn out, but similar.
Either way man, G luck to you. And if you sell the car, try to sell it to someone who will get it running not part it out.
Either way man, G luck to you. And if you sell the car, try to sell it to someone who will get it running not part it out.
#23
Super Raterhater
Thread Starter
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,630
Likes: 0
Received 3 Likes
on
3 Posts
Yeah, I've spent 4 months on this damn car so far, of that time, 3 of those months has been spent on waiting for everything to arrive and then, once those thing's arrived, waiting for the parts to FIX those thing's to arrive, then waiting for the parts I didn't know I had to fix, but figured out later. It's just pathetic. Here's a list of issue's with the guy I bought the engine:
Engine related:
All stuck side seals on the front rotor, no compression.
Series 4 turbo/manifold
Series 4 intake manifolds/throttlebody
Series 4 injectors (2 T2 and 2 NA)
Series 4 Front cover
Series 4 MOP
Series 4 waterpump
(pretty much a series 5 block with all series 4 parts)
I paid for a series 5 ecu, and he sends me a burnt out series 4!
The stock clutch fan was sold with the engine, which he has never shipped.
I bought the harness from him at the same time, and when I got it, it was a series 5 harness with the injector plugs hacked off and series 4 plugs on it.
I paid for the engine in full, and then had to wait around for a month before it finally got shipped! I then recieved the engine, but nothing else, no harness, no ecu, nothing! So I spent the next 2 weeks trying to contact him (never returned calls/never answered phone/responded to PM's once in a while saying he was busy/etc) I finally got ahold of his dad, and his dad said it would be sent out, I get it, and it's the series 4 ecu, and still no fan. If he would've sent me the right damn ECU at least (and it worked) I wouldn't be needing to buy yet ANOTHER ecu (the third damn one for this car, since I got one bad one, one bad series 4, and now I'll need a new one!) Just gets VERY tiring after a while.
Engine related:
All stuck side seals on the front rotor, no compression.
Series 4 turbo/manifold
Series 4 intake manifolds/throttlebody
Series 4 injectors (2 T2 and 2 NA)
Series 4 Front cover
Series 4 MOP
Series 4 waterpump
(pretty much a series 5 block with all series 4 parts)
I paid for a series 5 ecu, and he sends me a burnt out series 4!
The stock clutch fan was sold with the engine, which he has never shipped.
I bought the harness from him at the same time, and when I got it, it was a series 5 harness with the injector plugs hacked off and series 4 plugs on it.
I paid for the engine in full, and then had to wait around for a month before it finally got shipped! I then recieved the engine, but nothing else, no harness, no ecu, nothing! So I spent the next 2 weeks trying to contact him (never returned calls/never answered phone/responded to PM's once in a while saying he was busy/etc) I finally got ahold of his dad, and his dad said it would be sent out, I get it, and it's the series 4 ecu, and still no fan. If he would've sent me the right damn ECU at least (and it worked) I wouldn't be needing to buy yet ANOTHER ecu (the third damn one for this car, since I got one bad one, one bad series 4, and now I'll need a new one!) Just gets VERY tiring after a while.
#24
Full Member
Join Date: Mar 2002
Location: Oklahoma City, OK
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Damn that is SHITTY! Well as for getting mine running, I pulled my engine apart when I got it to check and replace the internals. Getting all the parts together takes some time as well. That is what has taken me so long. But I have also driven mine then pulled the engine, added mods, driven car, pulled the engine, added mods etc..
#25
WTB S5 N/A FC
Join Date: Oct 2001
Location: College Station, Tx
Posts: 2,778
Likes: 0
Received 0 Likes
on
0 Posts
Trust me, Sonic is my boy, and we have been chatting since the beginning of this swap back and forth. He has busted his *** trying to get this damn project to work. He has spent many nights (and so have I running out to my car at 2am w/ a flashlight...remember that one?)weekends, and days tryin to figure this out. Man, Sonic, I feel like I have some thing invested in this project myself, and I only wish you the best of luck bro!! Get your bike runnin, and fix up that 57!! Love, Peace, and Disco man!!