how do you change the idle on an 87 turbo II?
#1
Livin loud like TIMMAAAYY
Thread Starter
Join Date: May 2002
Location: Roper, North Carolina
Posts: 1,451
Likes: 0
Received 0 Likes
on
0 Posts
how do you change the idle on an 87 turbo II?
i want to raise the idle on my car to a lil over 1000 rpms. is this a good idea? would it hurt anything? if not, can anyone tell me how to do it? (i have not been able to get my hands on a service manual yet)
#2
BDC Motorsports
One was is through the idle adjust screw on the BAC valve. Turn it clockwise with the engine idling and see if it rises any. The other way is through the throttle stop screw on the primary throttle butterfly on the throttle body itself. It requires top-mount intercooler removal but it works like a champ, too.
B
B
#3
Senior Member
Join Date: Jul 2001
Location: Duncan, BC, Canada
Posts: 558
Likes: 0
Received 0 Likes
on
0 Posts
it doesnt require to remove the tmic..just a long screw driver..but this is the wrong way to adjust it so dont do it..search for threads called "tps" to find more info
#4
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 22 Likes
on
20 Posts
BDC is not talking about the tps screw. He's talking about the throttle stop screw on the aft side of the throttle body, near the water hose.
Why on God's green earth would you want to set your idle at a grand????
Free download of the factory service manual at http://iluvmyrx7.com
Why on God's green earth would you want to set your idle at a grand????
Free download of the factory service manual at http://iluvmyrx7.com
#5
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 22 Likes
on
20 Posts
Also you have a variable resistor, which is black, oval in shape, plastic, with a tower in the middlle. In the center of the tower is a screw that can be turned about three quarters of a turn. Has R and L embossed on either side fo the screw. The manual at the above site tells you how to adjust it , in the Fuel Section. Also note the screw in the bac really only has effect for the first 2-3 turns FROM being screwed full in. http://www.iluvmyrx7.com
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
ncds_fc
New Member RX-7 Technical
1
08-15-15 10:06 AM