how do i remove this pics inside
#26
90 Turbo
Join Date: Jun 2004
Location: Cookeville TN
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
If you are going to torch something torch that brake rotor and get it off the hub so you can get in there and get that bolt out your going to keep screwing with it until it is so rounded off you can't get it out without getting violent with it .
#27
Rotary Freak
Join Date: Apr 2002
Location: Boulder, CO
Posts: 1,739
Likes: 0
Received 0 Likes
on
0 Posts
meh, I've taken off plenty of these rear hub thingies, and I've never removed the rotor to do so. on the other hand, I've never gotten in my car any other way besides opening the door.
okay, so, it may make it easier to pull off the rotor, but IMHO, its really not neccesary if you're just removeing the old ones, its a bit more work (especially if they're rusted) to pull off the caliper/rotor, than to just leave them on, and maybe have a *slightly* tougher time. if you're replacing those bushings, then definetly neccesary. but I wouldn't worry about pulling the rotors off the old 4lug ones, if you'll be replacing them with the 5 lug ones anyway.
okay, this is stupid.
okay, so, it may make it easier to pull off the rotor, but IMHO, its really not neccesary if you're just removeing the old ones, its a bit more work (especially if they're rusted) to pull off the caliper/rotor, than to just leave them on, and maybe have a *slightly* tougher time. if you're replacing those bushings, then definetly neccesary. but I wouldn't worry about pulling the rotors off the old 4lug ones, if you'll be replacing them with the 5 lug ones anyway.
okay, this is stupid.
#28
Eats, Sleeps, Dreams Rotary
Thread Starter
Originally Posted by amishboy
Ya and you don't NEED to open the door to get in the car either but most people think it is easier than going through the sunroof or the back hatch .
second the screws are striped...
#31
Rotary Enthusiast
Man, I CRINGE everytime I hear crappy advice like some of the things posted above.
You don't need to remove the brake rotor, but it sure does make life easier. If the bolts in the rotor are stripped, use a dremel tool (Or air grinder) to remove the head of the bolt. Then use some 12mm bolts in the holes that are threaded into the rotor to push the rotor away from the hub.
As for the DTSS bolt? There are two forces at work here. #1: The rusted threads of the bolt. #2: The DTSS bushing is seized to the shaft of the bolt. If you can't break it loose with a 1/2" breaker bar, then heat is going to be your friend . Cook the DTSS bushing with a torch until it starts smoking. Then cook it some more... Once the rubber DTSS bushing releases, then the bolt will come out.
You don't need to remove the brake rotor, but it sure does make life easier. If the bolts in the rotor are stripped, use a dremel tool (Or air grinder) to remove the head of the bolt. Then use some 12mm bolts in the holes that are threaded into the rotor to push the rotor away from the hub.
As for the DTSS bolt? There are two forces at work here. #1: The rusted threads of the bolt. #2: The DTSS bushing is seized to the shaft of the bolt. If you can't break it loose with a 1/2" breaker bar, then heat is going to be your friend . Cook the DTSS bushing with a torch until it starts smoking. Then cook it some more... Once the rubber DTSS bushing releases, then the bolt will come out.
Last edited by wozzoom; 12-30-04 at 09:59 AM.
Thread
Thread Starter
Forum
Replies
Last Post
David Hayes
3rd Generation Specific (1993-2002)
13
09-05-22 12:45 PM