Hks Pfc-fcon
11-07-01 | 10:29 PM
#1
Thread Starter
Junior Member
Joined: Nov 2001
Posts: 21
Likes: 0
From: houston
Hks Pfc-fcon
My freind just gave me an HKS PFC-FCON for fixing his car. The bad news is I think I was supposed to get a pressure sensor along with it. And you probably guessed I didn't get any directions with it either or the wiring harness. I wanted to install this with out spending any money (I'm Broke). I'll buy a Pressure sensor if I have to. Has anybody ever installed one of these before in a t2 and if so is it very difficult. Can any one help me out with a wiring diagram? Also how much boost will I be able to run. I got spanked by a plymouth prowler today and I don't want that to happen again. Can anyone help possibly. THANKS.
11-08-01 | 12:47 AM
#2
Weird Cat Man
Joined: Aug 2001
Posts: 2,868
Likes: 3
From: A pale blue dot
I'll help!
Hey man,
Send me an email at brian@pop.net and I'll send you back the FCON instruction manual. Should at least help a little!
Brian
Send me an email at brian@pop.net and I'll send you back the FCON instruction manual. Should at least help a little!
Brian
11-08-01 | 09:11 PM
#3
SOLD THE RX-7!
Joined: Mar 2001
Posts: 7,451
Likes: 0
From: Vancouver, BC, Canada
yes you need a boost sensor, you also have to make sure the f-con is the right one. they were different for 87,88 and 89-91. it just plugs in between your engine harness and ecu. the a few wries run into the engine bay to the boost sensor.
11-08-01 | 09:25 PM
#4
Senior Member
Joined: Feb 2001
Posts: 611
Likes: 0
From: louisville, KY
