2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Hit brake car dies HELP~

Thread Tools
 
Search this Thread
 
Old 03-19-04 | 07:11 PM
  #1  
rx7andstuff's Avatar
Thread Starter
Junior Member

 
Joined: Mar 2004
Posts: 8
Likes: 0
From: Utah
Hit brake car dies HELP~

Ya so there it is i have an 87 na, here is the deal it starts ok and idle's semi ok you know with a little up down sounding anyway every time i hit on the brakes the car dies, i pulled off the vac line that goes into the brake area and plugged it up to see if that would help but no go still dies if i hit the brake cant find any other vacume leaks either please any ideas oh also tried turning idle up in case of power being taken away but even at full idle still dies.
Old 03-19-04 | 07:13 PM
  #2  
Kenteth's Avatar
Like Ghandi with a gun

 
Joined: Mar 2003
Posts: 4,584
Likes: 0
From: Rapid City, SD
I'm thinking BAC... but im not sure...
Old 03-19-04 | 07:23 PM
  #3  
rx7andstuff's Avatar
Thread Starter
Junior Member

 
Joined: Mar 2004
Posts: 8
Likes: 0
From: Utah
Ok im kinda new at this and cant find it in the search where is the BAC and what does that stand for.
Old 03-19-04 | 07:31 PM
  #4  
Full Member

 
Joined: Oct 2002
Posts: 54
Likes: 0
From: Alberta, Canada
Do you have any brake problems?
Old 03-19-04 | 07:33 PM
  #5  
rx7andstuff's Avatar
Thread Starter
Junior Member

 
Joined: Mar 2004
Posts: 8
Likes: 0
From: Utah
No the brakes work fine however i didnt try driveing while the vac line to the brakes was off cause i wouldnt have the same power to stop.
Old 03-19-04 | 07:35 PM
  #6  
totallimmortal's Avatar
Is that thing Turbo?

 
Joined: Jan 2004
Posts: 1,411
Likes: 0
From: Maryland
I had the same problem myself when i first put in a GXL brake booster and master cylinder, my problem was the little wire off the bottom of the master cylinder i hooked it up to the other white two prong connection right under the booster, my old mastercylinder didn't have the connection so the one in the car was connect to nothing, i kept blowing the fuse that controlled my gauges and AC panle, i pulled the connection and the problem dissapeared
Old 03-19-04 | 09:23 PM
  #7  
Digi7ech's Avatar
I break Diff mounts
iTrader: (1)
 
Joined: Jun 2002
Posts: 4,403
Likes: 4
From: Avondale, Arizona
I had a problem which was electrical.

My cars Voltage would drop drastically when the headlights were on and the brakes applied. So low that the car almost died.

I never figured it out since it magically fixed it self then a few weeks later blew an engine.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
alphawolff
1st Generation Specific (1979-1985)
17
11-17-15 06:57 PM
josef 91 vert
2nd Generation Specific (1986-1992)
23
09-03-15 12:20 PM
Marty RE
New Member RX-7 Technical
0
08-13-15 12:19 PM




All times are GMT -5. The time now is 05:24 AM.