High Flow Catalytic Converter
02-17-04, 08:14 PM
#1
High Flow Catalytic Converter
I have a S4 with a Racing Beat 3" turbo back exhaust, and I am going to need a cat to pass inspection/emissions. I was wondering of anyone has used MagnaFlow Performance Catalytic Converters clicky I am looking at aquiring the 3" w/ air pipe, part Number 94319.
Has any used or heard anything about these cats?
Has any used or heard anything about these cats?
02-21-04, 01:11 PM
#4
Senior Member
iTrader: (2)
Join Date: Jun 2003
Location: FWTX
Posts: 600
Likes: 0
Received 0 Likes
on
0 Posts
I used a $30 Catco 3" high-flow cat off E-bay....
It passed me with good numbers, you have to break in the cat for about 100 miles though.
I will probably have to replace it each time I go in for testing, but ****...it's $30
It passed me with good numbers, you have to break in the cat for about 100 miles though.
I will probably have to replace it each time I go in for testing, but ****...it's $30
02-21-04, 03:58 PM
#6
Originally posted by jgrts20
i did use that exact one, it did pass inspection too!! its loud though so watch it!! being its hollow the sound echos inside it!! but wroked very well!!
i did use that exact one, it did pass inspection too!! its loud though so watch it!! being its hollow the sound echos inside it!! but wroked very well!!
How long have you had it? Also what kind of downpipe do you have?
02-21-04, 06:40 PM
#7
Full Member
Join Date: Apr 2002
Location: Fayetteville, NC
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
I used the 3" Catco off ebay and welded some flanges from mazdatrix, I also needed about 5" of 3" from the local Muffler shop to get the cat extended to fit...
Cost about $70 for parts and 1/2 hour of welding...
It also got rid of the C-130 Hum in the cockpit when crusing at 80MPH, I am keeping it on until it causes problems...
The neighbors also like it better! :-)
Cost about $70 for parts and 1/2 hour of welding...
It also got rid of the C-130 Hum in the cockpit when crusing at 80MPH, I am keeping it on until it causes problems...
The neighbors also like it better! :-)
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM
