Help My Car Is Buckin Like A Bronco!!!
#26
Lives on the Forum
I just told you how, lol...Go to pin 2G (fourth one over from the right on the middle plug- I think it's the same for turbos)...Warm her up real good, make sure she's idling at about 750, and backprobe the pin with the pos lead, to ground with the negative one...If she's not between .9 and 1.1 volts, tweak on the adjustment screw out on the throttle linkage (might be under a cap) until you get your 1v...
#27
Rotary Enthusiast
Thread Starter
its was all at key on....and at least i thought it was a ground lol...i thought it was ground ground then to the injectors 3c then feul pump?3d? ill have to check there any reason (possibly ground reasons that there reading high?
But at any rate.... i changed the TPS and i took it for a drive, no bucking!!!! now i just have to adjust it and i dont know how
might check my crappy *** haynes manuel
But at any rate.... i changed the TPS and i took it for a drive, no bucking!!!! now i just have to adjust it and i dont know how
might check my crappy *** haynes manuel
#29
Lives on the Forum
Hmm, I've forgotten that part, lol...Just turn the screw 1/2 turn one way, and look at the meter again. If she's heading towards the 1v, keep turning that direction. If not, well...You should know what to do...
Thread
Thread Starter
Forum
Replies
Last Post
fastrx7man
3rd Generation Specific (1993-2002)
33
09-02-15 09:42 PM
smikels
2nd Generation Specific (1986-1992)
3
08-18-15 01:26 PM