Help! I dont want to hurt my wankle
#1
SpinningTrianglesOfDeath
Thread Starter
Join Date: Sep 2005
Location: Los Angeles
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Help! I dont want to hurt my wankle
okay so I have a 2nd gen turbo 2 Series 4. The mods I have are simple:
-exhaust (gonna make it a straight pipe)
-K&N filtercharger kit
-emissions/smog removed
okay now im gonna get a fuel cut defensor, remove cats and get straight pipe, 3 or 3.5 inch downpipe (not sure what size yet).
My questions is, Is this a good idea? what im worried about is boosting to high and killing my motor. Also i should be getting or rebuilding my injectors and maybe a fuel pump and filter. please help i wanna have my car setup right.
-exhaust (gonna make it a straight pipe)
-K&N filtercharger kit
-emissions/smog removed
okay now im gonna get a fuel cut defensor, remove cats and get straight pipe, 3 or 3.5 inch downpipe (not sure what size yet).
My questions is, Is this a good idea? what im worried about is boosting to high and killing my motor. Also i should be getting or rebuilding my injectors and maybe a fuel pump and filter. please help i wanna have my car setup right.
Last edited by FCTURBODEUX; 10-05-06 at 10:50 AM.
#4
Lives on the Forum
Get an upgrade fuel pump.
Rewire the fuel pump for better voltage.
I dunno why you would want a 3.5" downpipe; the 3.0" downpipe is fine.
I wouldn't recommend any boost controller.
People get into too much trouble messing with those things.
-Ted
Rewire the fuel pump for better voltage.
I dunno why you would want a 3.5" downpipe; the 3.0" downpipe is fine.
I wouldn't recommend any boost controller.
People get into too much trouble messing with those things.
-Ted
#5
Banned. I got OWNED!!!
You're already hurting your Wankel by spelling it wrong!
All the bolt ons in the world (other than a bigger turbo) won't put you above 12psi (with a properly ported wastegate)... At that point your next concern should be more fuel and a way to control it...
All the bolt ons in the world (other than a bigger turbo) won't put you above 12psi (with a properly ported wastegate)... At that point your next concern should be more fuel and a way to control it...
#6
Senior Member
Join Date: Sep 2005
Location: King, NC
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
I pulled the exhaust off at the end of the DP on my 93 talon, and I get mad boost creep. It is maxing my 14psi stock boost guage out, before it was at about 11, it is prolly around 18 or so now. It is fast as ****, and spins really good, but I wouldnt suggest it with your rotary engine, they seem to break easier.
#7
Full Member
Join Date: Mar 2003
Location: Florida
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
upgrade fuel pump
upgrade secondary injectors to 720
and fuel management (rteck chip, AFC, Standalone, ect)
port wastegate
Electronic boost controller will not controll boost creep
upgrade secondary injectors to 720
and fuel management (rteck chip, AFC, Standalone, ect)
port wastegate
Electronic boost controller will not controll boost creep
Trending Topics
#8
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,791
Likes: 0
Received 113 Likes
on
95 Posts
Originally Posted by SpooledupRacing
or buy an EBC and your all set.
EBC = Electronic Boost Controller
EBC = Electronic Boost Controller
Meaning that if he is boosting to 10 PSI without the controller, his minimum boost with the controller would be 10 PSI.
#9
SpinningTrianglesOfDeath
Thread Starter
Join Date: Sep 2005
Location: Los Angeles
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
how much would it cost to get my wastegate ported? or is it better if i get an aftermarket one? also im confused on whether or not i should get a boost controller. love the input guys and ya i fucked up i spelled wankel wrong
#10
SpinningTrianglesOfDeath
Thread Starter
Join Date: Sep 2005
Location: Los Angeles
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
is it worth getting a fuel management system for the mods im gonna get? if ya whats a good low budget system cause i know haltech is the **** but its way over my budget.
#11
Banned. I got OWNED!!!
You can only get an aftermarket wastegate if you are running a manifold (ie; turbo upgrade) that accepts an external wastegate... You can port the wastegate however (ideally 35mm), and there are many ways of modifying the flapper... To have someone do it would cost between $50 and a couple hundred bucks, unless you have a die grinder and a little free time...
#12
Full Member
Join Date: Mar 2003
Location: Florida
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
rtech 1.7 is good for the mods you want its a remap of your stock ecu and it pretty cheap $125
www.digitaltuning.com
www.digitaltuning.com
#14
SpinningTrianglesOfDeath
Thread Starter
Join Date: Sep 2005
Location: Los Angeles
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TII
without fuel management you can not run with the mods you want the car will run lean and blow up
rtek7 looks great im gonna get that as soon as i get the $$$
#15
long live the monster BP
Join Date: Nov 2005
Location: New Zealand
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
if you pull the turbo off and port the wastgate then you can get the 3" turbo back exhaust.
do you have a 3" TID with a pod k&n or just a k&n panel filter?.
Note. honestly. your gona have to pull the turbo of and port the wastgate before you do any mods to free up the restrictions other wise your gona blow your **** up.
do you have a 3" TID with a pod k&n or just a k&n panel filter?.
Note. honestly. your gona have to pull the turbo of and port the wastgate before you do any mods to free up the restrictions other wise your gona blow your **** up.
#16
Full Member
Join Date: Mar 2003
Location: Florida
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
once you free up the exh. the turbo will be able to boost higher so you need fuel so no exh. till injectors, fuel pump and rtech and portwastegate
airfilter sould be ok
save up and do it all at once the right way saves alot of headaches
airfilter sould be ok
save up and do it all at once the right way saves alot of headaches
#17
SpinningTrianglesOfDeath
Thread Starter
Join Date: Sep 2005
Location: Los Angeles
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TII
once you free up the exh. the turbo will be able to boost higher so you need fuel so no exh. till injectors, fuel pump and rtech and portwastegate
airfilter sould be ok
save up and do it all at once the right way saves alot of headaches
airfilter sould be ok
save up and do it all at once the right way saves alot of headaches
#18
Rotary Slave
iTrader: (3)
rtek 1.7, 720 injectors, fuel pump, bnr stage 2 turbo, exhaust and your good to go bud!
Plus that would only be about $1500- $1700 and probably get you as fast as youd like for now
At least thats the route Im taking and I hope to see mid to low 13's. With other mods of course, but that will be the main mods
Plus that would only be about $1500- $1700 and probably get you as fast as youd like for now
At least thats the route Im taking and I hope to see mid to low 13's. With other mods of course, but that will be the main mods
Last edited by FCKing1995; 10-09-06 at 07:38 PM.
#19
SpinningTrianglesOfDeath
Thread Starter
Join Date: Sep 2005
Location: Los Angeles
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FCKing1995
rtek 1.7, 720 injectors, fuel pump, bnr stage 2 turbo, exhaust and your good to go bud!
Plus that would only be about $1500- $1700 and probably get you as fast as youd like for now
At least thats the route Im taking and I hope to see mid to low 13's. With other mods of course, but that will be the main mods
Plus that would only be about $1500- $1700 and probably get you as fast as youd like for now
At least thats the route Im taking and I hope to see mid to low 13's. With other mods of course, but that will be the main mods
#20
Senior Member
Join Date: Sep 2006
Location: Toronto/Waterloo/Niagara Falls, Ontario
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Why don't people read Aaron's Website
Port that wastegate!
http://www.aaroncake.net/RX-7/s4wastegate.htm
Port that wastegate!
http://www.aaroncake.net/RX-7/s4wastegate.htm
#21
aim** JI II IM IM Y
Join Date: May 2005
Location: 90703 cerritos california
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RX7Boy06
Port your wastegate before the exhaust mods, if not your gonna have alot of problems with boost creep and it can kill your motor!!!
+1
#22
my brainworms hurt...
Join Date: Aug 2006
Location: boise,ID
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Dr4900n
Why don't people read Aaron's Website
Port that wastegate!
http://www.aaroncake.net/RX-7/s4wastegate.htm
Port that wastegate!
http://www.aaroncake.net/RX-7/s4wastegate.htm
+5
#24
SpinningTrianglesOfDeath
Thread Starter
Join Date: Sep 2005
Location: Los Angeles
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
how much is the bnr stage 2 turbo? and is it a direct replacement (can i keep all the other parts the same/stock: oil lines, wastegate, TID,etc.)