Help!! How do i adjust camber?!?
#1
WTF
Thread Starter
iTrader: (1)
Join Date: Jan 2003
Location: Tennessee
Posts: 752
Likes: 0
Received 0 Likes
on
0 Posts
Help!! How do i adjust camber?!?
The inside of my tire is wearing off much quicker than the outside. You can even see my tires slanted when looking at the back of the car...that is camber right?? How do i adjust it? I dont see anything about adjusting it in my FSM, only about checking it with some tool i dont have Help i dont have enough money to keep buying tires
#4
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 22 Likes
on
20 Posts
If it's a stock suspension....your shock/springs are worn out.
If its an aftermarket spring configuration....buy the camber adjuster/adjusters for the rear suspension from Mazdatrix.com
Springs do wear out especially if the shocks were dead for a long period of time.
If its an aftermarket spring configuration....buy the camber adjuster/adjusters for the rear suspension from Mazdatrix.com
Springs do wear out especially if the shocks were dead for a long period of time.
Trending Topics
#9
Rotary Enthusiast
Join Date: Sep 2002
Location: Statesboro, GA
Posts: 1,233
Likes: 0
Received 0 Likes
on
0 Posts
no dude, the spring goes around the strut/shock. you need a spring compressor to take tension off the strut so you can take the nut off the top and then take your spring off. if your springs and struts are wore out you probably don't even have to take them apart. Just buy replacement springs and struts, put them together and install.
#11
WTF
Thread Starter
iTrader: (1)
Join Date: Jan 2003
Location: Tennessee
Posts: 752
Likes: 0
Received 0 Likes
on
0 Posts
ok cool...and probably autozone will have the spring compressor tool for rent?? im 100% sure you guys are right because when i jack the car up the spring and shock thing looks and feels all loose and floppy. Also the *** end of my car sways wildly at high speeds...probably related wouldnt you think??
#13
WTF
Thread Starter
iTrader: (1)
Join Date: Jan 2003
Location: Tennessee
Posts: 752
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by GTR
an alignment is like 50-60 bucks. Does your tires wear out in the front or back?
an alignment is like 50-60 bucks. Does your tires wear out in the front or back?
#16
WTF
Thread Starter
iTrader: (1)
Join Date: Jan 2003
Location: Tennessee
Posts: 752
Likes: 0
Received 0 Likes
on
0 Posts
ok thanks hailers...the shock absorbers on my parts car seemed better than my current ones...and the tires didnt wear off the inside when my parts car was running...as im looking in my FSM on page 13-14 it only shows 3 things to take off 1: the nuts on top of the shock 2: the bolt near the bottom 3: the shock itself , is that correct? And will i need a spring compressor or will i be able to get it back on without one?
#17
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 22 Likes
on
20 Posts
NO spring compressor needed. Just remember to NOT remove the LARGE nut at the TOP of the shockabsorber assy. Just the four small nuts on the top and the one large nut at the bottom of the shock strut.
You have to jack the rear up though. You'll need to be able to giggle which ever wheel assy your working on, up and down a touch in order to remove the shock from the shaft it sits on at the bottom. jThe top should just drop down once the four small nuts are removed.
**********WARNING****************
DO NOT REMOVE THE LARGE NUT AT THE TOP CENTER OF THE SHOCK STRUT ASSY. Just the four small ones. It should not be very difficult. A touch time consuming because your doing two cars in a sense.
You have to jack the rear up though. You'll need to be able to giggle which ever wheel assy your working on, up and down a touch in order to remove the shock from the shaft it sits on at the bottom. jThe top should just drop down once the four small nuts are removed.
**********WARNING****************
DO NOT REMOVE THE LARGE NUT AT THE TOP CENTER OF THE SHOCK STRUT ASSY. Just the four small ones. It should not be very difficult. A touch time consuming because your doing two cars in a sense.
#18
WTF
Thread Starter
iTrader: (1)
Join Date: Jan 2003
Location: Tennessee
Posts: 752
Likes: 0
Received 0 Likes
on
0 Posts
well that is awesome info HAILERS thanks for the advice...i read a few threads on the subject when i searched but nothing that confirming. the rear strut tower top is in the speaker right?? i have to take the speaker out?
#19
WTF
Thread Starter
iTrader: (1)
Join Date: Jan 2003
Location: Tennessee
Posts: 752
Likes: 0
Received 0 Likes
on
0 Posts
Ok, I swapped over the rear shocks and I wont be able to tell if my camber is much better right off the bat except that my tires appear to be more straight up and down, but the entire *** end of my car is much much tighter, even with used suspension components... I will be switching the fronts over tomorrow to see how much they help. Anyone have any tips or tricks for the fronts? Any suggestions are appreciated!!
James
P.S. Thanks HAILERS
James
P.S. Thanks HAILERS
Last edited by Rotory; 10-19-03 at 06:30 PM.
#24
Eats, Sleeps, Dreams Rotary
iTrader: (1)
Check the Mazdatrix website for rear camber adjustments. It could be links are worn allowing too much camber. Adj rods are available. I purchased the 2 rear on car adj links, but are a little pricey. With the extremely wide tires, and within factory specs, I was getting slight wear on the inside, so this corrected that.
While your under there, you might as well check the toe also, as that will wear tires quite rapidly.
While your under there, you might as well check the toe also, as that will wear tires quite rapidly.