Help!! detonating! (Searched)have fuel
02-06-04, 10:49 AM
#26
Rotary Enthusiast
Originally posted by gsracer
Whoah there. If anything he should be running stupidly rich at only 10-11 pounds with the walbro and gsl-se secondaries which is why this is strange. Like mentioned above: find what voltage is getting to the fuel pump, check for fuel pressure, check your ignition timing. Yes, getting this thing on a dyno with a wideband might help diagnos this problem quicker and more accurately.
Whoah there. If anything he should be running stupidly rich at only 10-11 pounds with the walbro and gsl-se secondaries which is why this is strange. Like mentioned above: find what voltage is getting to the fuel pump, check for fuel pressure, check your ignition timing. Yes, getting this thing on a dyno with a wideband might help diagnos this problem quicker and more accurately.
Any way you look at it, the car needs to be treated gently until it is tuned.
02-06-04, 01:56 PM
#27
Senior Member
Thread Starter
Join Date: Apr 2002
Location: Los Angeles
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by wozzoom
Should be running rich but maybe its not. Do you know for sure? There are a lot of varriables that can only be eliminated with proper tuning and a wideband.
Any way you look at it, the car needs to be treated gently until it is tuned.
Should be running rich but maybe its not. Do you know for sure? There are a lot of varriables that can only be eliminated with proper tuning and a wideband.
Any way you look at it, the car needs to be treated gently until it is tuned.
I totally agree, Im going to tune it asap at the "Performance garage" here. thy have a dynojet & a wideband 02.. until then im staying below 6psi
Im gona do a timing check today, if I was to retart it what degrees should I go for? and what is the stock timing?
thanks guys
02-22-04, 01:01 AM
#31
Senior Member
Thread Starter
Join Date: Apr 2002
Location: Los Angeles
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
I ended up slapping on a t04b hybrid instead and I have it tuned well now for 13psi......
No pingin nemore I think it was due to excessive intake temps.
P.S It made 296.5 RWHP
Jesse
No pingin nemore I think it was due to excessive intake temps.
P.S It made 296.5 RWHP
Jesse
02-22-04, 03:54 AM
#34
Senior Member
Join Date: Apr 2002
Location: Washington State
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by $150FC
are you sure it's actual detonation? If it's happened two or three times your engine should already be screwed.
are you sure it's actual detonation? If it's happened two or three times your engine should already be screwed.
02-22-04, 02:06 PM
#35
Senior Member
Thread Starter
Join Date: Apr 2002
Location: Los Angeles
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
THe settings on the bottom are for my safc 2:
4k----+2
4.6k--+3
5.2k=+9
5.8k+12
7.0k--+13
that was for from the final 13psi run (the green)
here are my current settings with altered rpm points
according to the map..
all high throttle %99 (boost sensor settings)
2.6--- +2
3.0 +2
3.6 +3
4.2 -3
4.6 -4
5.2 +13
6.0 +18
6.4 +20
6.6 +22
6.8 +21
4k----+2
4.6k--+3
5.2k=+9
5.8k+12
7.0k--+13
that was for from the final 13psi run (the green)
here are my current settings with altered rpm points
according to the map..
all high throttle %99 (boost sensor settings)
2.6--- +2
3.0 +2
3.6 +3
4.2 -3
4.6 -4
5.2 +13
6.0 +18
6.4 +20
6.6 +22
6.8 +21
02-22-04, 03:21 PM
#37
Rotary Enthusiast
Join Date: Sep 2002
Location: Statesboro, GA
Posts: 1,233
Likes: 0
Received 0 Likes
on
0 Posts
Kinda late response and you've probably already fixed it but:
I have a streetport with stock turbo, stock IC, stock injectors and stock ECU, with custom intake and 3" exhaust and also boosting 20psi, and i don't have detonation. I don't see why you're having such a problem with it. Just thought i'd add this to the thread.
I have a streetport with stock turbo, stock IC, stock injectors and stock ECU, with custom intake and 3" exhaust and also boosting 20psi, and i don't have detonation. I don't see why you're having such a problem with it. Just thought i'd add this to the thread.
02-22-04, 06:09 PM
#38
EIT
Join Date: Jan 2002
Location: Austin, TX
Posts: 1,790
Likes: 0
Received 0 Likes
on
0 Posts
I like you're green run a lot better. Mid 12 a/f numbers are pretty damn agressive.....I'd shoot for mid 11's. Maybe you should go with some 850 secondarys or 4 x 720. I'm impressed with the numbers beyond that though. You are maxing out the 720's by 290 rwhp.
02-22-04, 07:04 PM
#39
Full Member
Join Date: Sep 2002
Location: austin
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
I have few questions, and you guys seem like you could answer them.
What exactly is this pinging noise? What causes the engine to make this noise? And is it a distinct ping noise or is it a ticking noise?
What exactly is this pinging noise? What causes the engine to make this noise? And is it a distinct ping noise or is it a ticking noise?
02-22-04, 09:47 PM
#40
Senior Member
Thread Starter
Join Date: Apr 2002
Location: Los Angeles
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Jeff Armann from Turbo Auto in Nashville built it for me.
real nice work... as you
SPECS: To4B V-trim compressor @ housing
Self ported WG --- creeps up to 10 psi
SHould be good for 380rwhp at like 18-19 lbs.
Im upgrading my fuel system with some 680cc pri & 850cc secondaries
real nice work... as you
SPECS: To4B V-trim compressor @ housing
Self ported WG --- creeps up to 10 psi
SHould be good for 380rwhp at like 18-19 lbs.
Im upgrading my fuel system with some 680cc pri & 850cc secondaries
02-22-04, 09:47 PM
#41
Senior Member
Thread Starter
Join Date: Apr 2002
Location: Los Angeles
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Jeff Armann from Turbo Auto in Nashville built it for me.
real nice work... as you can see
SPECS: To4B V-trim compressor @ housing
S5 hotside
Self ported WG --- creeps up to 10 psi
Type-R Exhaust leak
SHould be good for 380rwhp at like 18-19 lbs.
Im upgrading my fuel system with some 680cc pri & 850cc secondaries
real nice work... as you can see
SPECS: To4B V-trim compressor @ housing
S5 hotside
Self ported WG --- creeps up to 10 psi
Type-R Exhaust leak
SHould be good for 380rwhp at like 18-19 lbs.
Im upgrading my fuel system with some 680cc pri & 850cc secondaries
Last edited by imflammable9; 02-22-04 at 09:49 PM.
Thread
Thread Starter
Forum
Replies
Last Post
