HELP! cant start engine
#1
Full Member
Thread Starter
Join Date: Sep 2006
Location: Coquitlam BC
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
HELP! cant start engine
well i recently dropped off my rebuilt N/A 88 13B to swap it with my current blown one. And when i went to pick it up they had problems getting it started
i was there helping, but all it did was turnover and fire once in a while.
It kept on flooding, we pulled the plugs numerous times and it was soaked in gas, when we tried to deflood it fuel was coming out the exhuast and housings.
i called a rotary shop and they said it had to do with the dizzy, how it was not lined up properly.
we lined up the dizzy gear with the dimble and tired starting it trying out both marks on the e-shaft pulley but no luck, kept on flooding. It wants to fire but its just flooding way too much.
and suggestions thanks!
i was there helping, but all it did was turnover and fire once in a while.
It kept on flooding, we pulled the plugs numerous times and it was soaked in gas, when we tried to deflood it fuel was coming out the exhuast and housings.
i called a rotary shop and they said it had to do with the dizzy, how it was not lined up properly.
we lined up the dizzy gear with the dimble and tired starting it trying out both marks on the e-shaft pulley but no luck, kept on flooding. It wants to fire but its just flooding way too much.
and suggestions thanks!
#2
Full Member
Thread Starter
Join Date: Sep 2006
Location: Coquitlam BC
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
i called today and the shop found the problem, the didn't know it had 2 different types of plugs so the mixed it up. so they put it in properly and fired right up!
but now they need to solve the low idle
any suggestions?
thanks
but now they need to solve the low idle
any suggestions?
thanks
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM