Jayson Latham

I have spent too much time looking on the
Internet to see if there is a turbo blanket
that I can buy they won't get in the way of the
Waste gate. But I can't find anything. I just got
My turbo back from BNR and need a turbo blanket
Since my Heat shield is shot. I appreciate any help
I can get

VANHALEN

iTrader: (3)

I have this one:

DEI 010144 DEI Titanium Turbo Shields

There are many out there to choose from and prices vary .
Cheap ones will disintegrate after a short time. Ones from DEI are very well made.
If your back side is stock turbine, a T3 shield would be a better fit.
When engine is idling, you can actually place your hand on the blanket.

Amazon has free shipping

Jayson Latham

Thanks alot!!

wthdidusay82

iTrader: (15)

That blanket cost as much as I paid for my s5 Turbo so it better be nice lol

Jayson Latham

Vanhalen , u thought the stock backside is a T4? Or
Does it fit better from ur experience ?
Thanks

Jayson Latham

Sorry I meant to write I thought the stock turbo
Hotside is a t4. You have the t4 blanket or t3?

gear_grinder

iTrader: (4)

better then the stock heat shields? maybe. will you notice a difference? no

VANHALEN

iTrader: (3)

If you have a stock turbo ,use a T3 blanket . That's the smallest
available . A T3 will fit turbine size 5-6 " and T4 6-8" (a/r).
The actuator rod will be in the way so you need to see how you will
get it on to not disturb the movement.

I have a T4 .96 a/r and the t4 blanket fits perfectly.
With the blanket and wrapped down pipe,
it is a huge difference .

Check around for prices . eBay is not a bad place.
If a seller is selling a blanket for 19.99, I probably would pass.
A good blanket will tolerate 1800f continuous heat .

90TII rx7

I am in need of a turbo blanket for a BNR stage 1 turbo also, so the blanket in the link fits a BNR stage 1? If not, which one is needed? thanks.