2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

Help... Air Bag Alarm Alert on my 91 vert.

Thread Tools
 
Search this Thread
 
Old 04-26-07, 06:25 PM
  #1  
Junior Member

Thread Starter
 
marcoruiz's Avatar
 
Join Date: Dec 2003
Location: Houston
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Help... Air Bag Alarm Alert on my 91 vert.

After taking my front bumper off my 91 'vert for painting and after re-assembly, my Air Bag Alarm Alert keeps beeping w. the warning lamp on the dash? My car wasnt wrecked... just decided to give the whole car a face-lift w. fresh paint. Is this fix as simple as resetting the ECU? Or did the sensors move? Can anyone help?

Thanks in advance!
-Marco
marcoiruiz@hotmail.com
Old 04-26-07, 09:54 PM
  #2  
Former Moderator. RIP Icemark.
 
Icemark's Avatar
 
Join Date: Apr 2001
Location: Rohnert Park CA
Posts: 25,896
Likes: 0
Received 20 Likes on 20 Posts
probably either turned the ignition on with the bumper sensor disconnected or failed to plug the sensor back in
Old 04-27-07, 02:09 PM
  #3  
Junior Member

Thread Starter
 
marcoruiz's Avatar
 
Join Date: Dec 2003
Location: Houston
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Icemark
probably either turned the ignition on with the bumper sensor disconnected or failed to plug the sensor back in

The sensors are located on the frame and dont think they were touched, but I maybe wrong. I'll try to disconnect and reconnect. Maybe it's a a loose connection. Anything else it could be?

Thanks!
Old 04-30-07, 06:08 PM
  #4  
Junior Member

Thread Starter
 
marcoruiz's Avatar
 
Join Date: Dec 2003
Location: Houston
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Question

Originally Posted by marcoruiz
The sensors are located on the frame and dont think they were touched, but I maybe wrong. I'll try to disconnect and reconnect. Maybe it's a a loose connection. Anything else it could be?

Thanks!
Anyone have any other ideas?
Old 05-01-07, 03:42 PM
  #5  
Full Member
Tenured Member 20 Years
iTrader: (5)
 
T2 vert's Avatar
 
Join Date: Jul 2001
Location: Bedford, Texas
Posts: 192
Received 2 Likes on 2 Posts
There is a sensor between the coolant recovery bottle and hood latch. Make sure it is bolted in place, there are two bolts, that is how it is grounded.




All times are GMT -5. The time now is 09:15 PM.