potter

have a friend that we just hooked up a new engine and 5 speed tranny and his original one was auto .and of cores the x-05 and x-14 plugs are diffrent .i did see a posting for connecting the plugs but .the posting that i did read from this site helped alittle but but i was woundering if any one had any better info on the wires that go to gether and i think this is a 3rd generation its a 1993 rx7 twin turbo..can any one help

imloggedin

wrong section

SpeedOfLife

iTrader: (16)

first of all, it's a 3rd gen and you're in the 2nd gen forum. go to the 3rd gen section, I'm sure they have an FAQ and FSM that you can look through and find your answer.

at least with the 13B motors though, Leading (L) are on the bottom and Trailing (T) are on top. Then you match the Leading coil lead marked 1 to the front Leading plug, Leading coil marked 2 to the rear Leading plug, then the coil marked Trailing 1 to the front Trailing plug, and the coil marked Trailing 2 to the rear Trailing plug.

edit: almost forgot, the 3rd gen motor is still a 13B so that's even more evidence toward them being labeled EXACTLY the same way.

pfsantos

iTrader: (1)

I have a feeling the OP is talking about harness plugs, since he mentions x-05 and x-14, but could be wrong.

OP, this forum is a great resource, but we need more info with pics. on what the trouble is. If it's 3rd gen. related, post there. Make sure you mention where the donor engine came from (3rd gen.?) and where it's going (3rd gen. or swap into 2nd gen and if so S4 or S5?).

"and i think this is a 3rd generation its a 1993 rx7" - you need to be sure or else we can't help.