Ritteler

Hi
Have 87 Turbo 2. Starts fine cold and runs ok at high idle but once started and turned off will not start regardless of how long it ran, 90 seconds or 20 minutes. It must sit for about 4 to 5 hours then it starts right up. It will also stall after about 2 minutes if just let to run on its own and not keeping it at a higher idle (1500rpm or more). Any help would be appreciated. thanks

WAYNE88N/A

You flooding at all? Are any of the plugs wet after one of these "no starts"?

Check for vac leaks that like to get worse when she's warm...