Guyz I need some serious help
11-03-02, 02:53 AM
#1
Newbie
Thread Starter
Join Date: Jun 2002
Location: Melbourne Victoria Australia
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Guyz I need some serious help
Hey guyz,
I am a soon to be seies 4 turbo owner. I have a bit of a tight budget but I want the Gen 2 to look sweet and go pretty hard. I am a p-plater so I really should stay under the ratio (but I am not too bothered). I would love to hear any ideas u guyz have got for me.I know a little bit about rotaries but not enough to help myself. I would appreciate all the help possible.
Thanx
I am a soon to be seies 4 turbo owner. I have a bit of a tight budget but I want the Gen 2 to look sweet and go pretty hard. I am a p-plater so I really should stay under the ratio (but I am not too bothered). I would love to hear any ideas u guyz have got for me.I know a little bit about rotaries but not enough to help myself. I would appreciate all the help possible.
Thanx
11-03-02, 10:31 AM
#3
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,791
Likes: 0
Received 114 Likes
on
96 Posts
Tight budget=bad. These cars are serious money pits, especially the turbos.
Check out http://www.aaroncake.net/rx-7/buy1.htm for lots of info. It doesn't have any turbo specific stuff, but it covers everything else.
Check out http://www.aaroncake.net/rx-7/buy1.htm for lots of info. It doesn't have any turbo specific stuff, but it covers everything else.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM