got my new setup! Pics included
#1
Rotary Enthusiast
Thread Starter
Join Date: Aug 2001
Location: KC
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
got my new setup! Pics included
Well, here is my new setup:
Haltech E6K
60-1 Turbonetics turbo with anodized back plate and 360 degree thrust bearing
HKS Turbo manifold
HKS wastegate with 5 psi spring
All AN fittings and lines for turbo
Custom fit and welded NPR large intercooler with 2.5" inlet and outlet
2.5" Polished aluminum tubing
All silicon connectors with T-bolt clamps
Custom TB inlet
4" cone filter
Blitz BOV
720 cc/min primaries
1600 cc/min secondaries
-6 AN Aeromotive fuel line and fittings
Aeromotive RRFPR
Walbro 255 l/h fuel pump
boost, EGT, water temp, and fuel pressure gauges
Greddy Profec B
Custom heat-wrapped 3" downpipe
Full 3" exhaust with Borla ProXS muffler
E-fan
Howe radiator
S6 alternator
Battery relocated to passenger compartment bin
removed power steering
removed A/C
removed radio/cd/tape/speakers
Haltech E6K
60-1 Turbonetics turbo with anodized back plate and 360 degree thrust bearing
HKS Turbo manifold
HKS wastegate with 5 psi spring
All AN fittings and lines for turbo
Custom fit and welded NPR large intercooler with 2.5" inlet and outlet
2.5" Polished aluminum tubing
All silicon connectors with T-bolt clamps
Custom TB inlet
4" cone filter
Blitz BOV
720 cc/min primaries
1600 cc/min secondaries
-6 AN Aeromotive fuel line and fittings
Aeromotive RRFPR
Walbro 255 l/h fuel pump
boost, EGT, water temp, and fuel pressure gauges
Greddy Profec B
Custom heat-wrapped 3" downpipe
Full 3" exhaust with Borla ProXS muffler
E-fan
Howe radiator
S6 alternator
Battery relocated to passenger compartment bin
removed power steering
removed A/C
removed radio/cd/tape/speakers
Trending Topics
#12
In Full Autist Cosplay
iTrader: (1)
Join Date: Nov 2002
Location: Alberta
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mrb63083
WOW, look at all those pictures....
...cough
WOW, look at all those pictures....
...cough
Anyways - How much did all this cost you? Looks good, but at the same time like you skimped on a few things under the hood..
No offence of course..
Edit - But then again, Haltec isn't for someone on a budget..
Last edited by Black13B; 07-31-03 at 10:10 PM.
#14
Rotary Enthusiast
Thread Starter
Join Date: Aug 2001
Location: KC
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Black13B
Anyways - How much did all this cost you? Looks good, but at the same time like you skimped on a few things under the hood..
No offence of course..
Anyways - How much did all this cost you? Looks good, but at the same time like you skimped on a few things under the hood..
No offence of course..
#17
Rotary Enthusiast
Thread Starter
Join Date: Aug 2001
Location: KC
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by silverrotor
Looks like you put In alot of time and effort. Good deal ponykiller. 2 questions.
How come the TB Isn't painted Black? I dunno. I'd want to keep It consistent.
Is that a custom elbow you made, for the Intake? (I'm trying to source out a Greddy one, btw).
Looks like you put In alot of time and effort. Good deal ponykiller. 2 questions.
How come the TB Isn't painted Black? I dunno. I'd want to keep It consistent.
Is that a custom elbow you made, for the Intake? (I'm trying to source out a Greddy one, btw).
The custom elbow is for the intake, sorry that was not very clear. I actually bought it from a friend, so I can not tell you how to make one.
#19
In Full Autist Cosplay
iTrader: (1)
Join Date: Nov 2002
Location: Alberta
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ponykiller
None taken. But would you care to tell me what you are reffering to? I would assume my upper radiator hose is a point against me, but other than that I do not really know what else I still need to work on.
None taken. But would you care to tell me what you are reffering to? I would assume my upper radiator hose is a point against me, but other than that I do not really know what else I still need to work on.
But mainly your Rad/IC mount area.. with the universal mounting bracket?
IMO That's not a good idea.. It wouldn't be sturdy enough for my liking I wouldn't imagine..
Those two stuck out at me while I was looking at an overall pleasing EB.
#22
Blue bottle where the stock intake is located, remind what that is?
Looks good, what did you wrap the main harness loom with?
How well does the dp wrap work, as in noticeable heat difference under hood? Damn that **** is hot under my hood!
I want an s6 alt and borla muffler instead of my presilencer!
Looks good, what did you wrap the main harness loom with?
How well does the dp wrap work, as in noticeable heat difference under hood? Damn that **** is hot under my hood!
I want an s6 alt and borla muffler instead of my presilencer!
#23
The mystery of the prize.
Originally posted by 1Revvin7
Blue bottle where the stock intake is located, remind what that is?
Looks good, what did you wrap the main harness loom with?
How well does the dp wrap work, as in noticeable heat difference under hood? Damn that **** is hot under my hood!
I want an s6 alt and borla muffler instead of my presilencer!
Blue bottle where the stock intake is located, remind what that is?
Looks good, what did you wrap the main harness loom with?
How well does the dp wrap work, as in noticeable heat difference under hood? Damn that **** is hot under my hood!
I want an s6 alt and borla muffler instead of my presilencer!
#24
Rotary Enthusiast
Thread Starter
Join Date: Aug 2001
Location: KC
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Black13B
The upper rad hose, yes.
But mainly your Rad/IC mount area.. with the universal mounting bracket?
IMO That's not a good idea.. It wouldn't be sturdy enough for my liking I wouldn't imagine..
Those two stuck out at me while I was looking at an overall pleasing EB.
The upper rad hose, yes.
But mainly your Rad/IC mount area.. with the universal mounting bracket?
IMO That's not a good idea.. It wouldn't be sturdy enough for my liking I wouldn't imagine..
Those two stuck out at me while I was looking at an overall pleasing EB.
#25
Rotary Enthusiast
Thread Starter
Join Date: Aug 2001
Location: KC
Posts: 819
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Kuhrazy7
wud u paint ur uim with?
wud u paint ur uim with?
I went to O'Reilly's and picked up some high temp engine paint. They will have several different types/brands/temp ratings. I actually did the LIM with 1200 degree paint, and the UIM with 600 degree paint. All rattle can.