rx_7_driver

ok i've shearched and posted alot on this but now its time to get dirty............

i will be starting my 5 speed swap on my 90 N/A vert auto

for all of u that have done it have u ran into a problem that had u stumped for awhile??? i only have a week (5 days) to go from auto to 5-speed and only working on it about 2-3 hours a day.

also any one know the measurements for the crossbeam i will need for the tranny mount i have someone who can make it for me but i need to know the size of it and where the holes will need to be drilled (pics would also be nice) and any tips on the pedel ***. i heard it was a bitch)
thanks goes out to all who reply with help

-Shawn

edit: please post replies asap cause my puter is going back for repairs tomorrow (the 18th) and i don't know when its gonna be fixed.

oppressor666

I did the same procedure, but on an 88 about a year ago. For the crossmember, I do not have any measurments but I do have a a few pics that might help. The pedal assembly was not to bad, just get the whole thin from a junk yard. t would almost be easier to take the whole dash out because it was a pain in the *** to get the old one out. But good luck with it. Now I will try and post some pics, it never seems to work for me. Marc

oppressor666

second pic

oppressor666

Oh yeah the wiring kinda sucks too, but if you get a manual wiring harness that would probably be a lot easier. Marc

rx_7_driver

thanks oppressor666

anyone else??


-Shawn

oppressor666

I just notice yours is a vert, so this may or may not help. My was on a coupe, but hey the pics can be a starting point. Marc

rx_7_driver

well from what i heard they r the same


-Shawn

rx_7_driver

ok first Q will the starter from my auto work on the 5-speed?


-Shawn

knight1976

NO it wont.

rx_7_driver

hey u got one forsale knight1976?

-Shawn

knight1976

Yup 35 bucks shipped and its yours. Just send me another money order and ill stick it in the box with your other stuff monday. Let me know.

knight1976

And its 100% tested and verified good by me

rx_7_driver

ok but i can't send another M/O till wed. u can wait till u get it to send it r send it with the rad it dosen't matter i won't need it till sometime next week

-Shawn (off to work)

knight1976

OK sounds cool man. Ill slap it in the box so you can get your **** running. Just shoot me a MO Wed and its all good.

rx_7_driver

ok new Q, the pedal assembly.

i have the clutch pedal and from what it looks like there is a bar under there for it to go on. the ? is will that bar come out so i can but the pedel on r do i need the the bracket under there, and if so will one from an 88 work ???? (its the only rx7 i can find in a junk yard and i am still not sure if it was a 5-speed r not 'no tranny in it r engine' )


-Shawn

rx_7_driver

bump for the night people

rx_7_driver

bump and another Q, dose anyone make the adaptor for the tranny(the guy that i asked went on vacation before i could talk to him), i was praticing my welding skills today and all i can say i suck at it, if anyone dose make it drop me a price please


-Shawn