Good place to buy a motor?
08-13-02, 12:03 PM
#51
What Subscription?
And I went to their recommendation:
http://www.jspecjdm.net/
1100 for JAPENEESE JUNKYARD MOTORS!!!!!! BAHAHAHA
http://www.jspecjdm.net/
1100 for JAPENEESE JUNKYARD MOTORS!!!!!! BAHAHAHA
08-13-02, 02:33 PM
#53
so has anyone has good experience with jspec motors? looks like you're as good going jspec as you are going through hayes.
and it seems that rotaryresurrection.com is down or is it just me.
i'm in the market for a s4 motor to swap into my FB. any suggestions?
and it seems that rotaryresurrection.com is down or is it just me.
i'm in the market for a s4 motor to swap into my FB. any suggestions?
08-13-02, 02:43 PM
#54
What Subscription?
I'm sure there are alot of people who have had good experiences with them. One point that is not mentioned here is: All the JSPECS are at least 10 years old now. They are used engines, You don't think that there is a hard-core group of enthusiasts in JAPAN thaat don't need new motors? What about the guys from NZ and the Aussies?
There is not an unlimited pool of engines to pull from. These motors are not guarenteed or confirmed to be low milage. Very few importers even have them in STOCK. Go ahead, call around.
There is not an unlimited pool of engines to pull from. These motors are not guarenteed or confirmed to be low milage. Very few importers even have them in STOCK. Go ahead, call around.
08-13-02, 02:46 PM
#55
Full Member
Join Date: Dec 2001
Location: ROTARY RESERVATIONS CAMP
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by banzaitoyota
RYANDOGG: Your source appears to be BOGUS: Here is the Email I just recieved from them:
From: JDMCars <sales@jdmcars.com>
To: zach12@TOOLKITMAIL.COM
Date: Tue, 13 Aug 2002 12:35:39 -0400
Subject: Re: Re:
Opps, I am sorry. I missed that in your email. We just hand another inquiry
on the RX7, must have gotten the emails mixed up.
We haven't seen the earlier RX7 motors for over 8 months now, I don't think
we will be getting them in any longer.
You might want to try -www.jpsecjdm.net
Tell them JDMCars sent you please.
Sincerely,
Customer Service
www.jdmcars.com
550 JSPECS!!! HAAAAAAA!!!!!
RYANDOGG: Your source appears to be BOGUS: Here is the Email I just recieved from them:
From: JDMCars <sales@jdmcars.com>
To: zach12@TOOLKITMAIL.COM
Date: Tue, 13 Aug 2002 12:35:39 -0400
Subject: Re: Re:
Opps, I am sorry. I missed that in your email. We just hand another inquiry
on the RX7, must have gotten the emails mixed up.
We haven't seen the earlier RX7 motors for over 8 months now, I don't think
we will be getting them in any longer.
You might want to try -www.jpsecjdm.net
Tell them JDMCars sent you please.
Sincerely,
Customer Service
www.jdmcars.com
550 JSPECS!!! HAAAAAAA!!!!!
but then again i would call them back but i dont have their number.. they called me .... aight this a fuckt up world.. just as u think its too good to be true.. in the end it truly is...
08-13-02, 02:54 PM
#56
What Subscription?
Ryan, I emailed a request for a motor and that was THEIR replay to me. THEY DONT HAVE ANY AND DON'T SEE ANY COMING IN.
Please post their number so I can call them. I would love a 550 CORE.
BUT THEY SAID THEY DON'T F$^&$ HAVE ANY!
Please post their number so I can call them. I would love a 550 CORE.
BUT THEY SAID THEY DON'T F$^&$ HAVE ANY!
08-13-02, 03:15 PM
#57
What Subscription?
Quick Informal Poll:
Nippon-Motors: 3 86-88 in stock 750
FC3S.org: NIS
Libero: NIS
Order UP Imports: Checking with Distributor
JTZENTERPRISE.Com: Not importing anymore
JDMCARS.Com: NIS, not expecting anymore
Of 6 importers/distributors contacted, only 3 "confirmed" 86-88 engines in stock. So maybe only 1 or 2 of them are good based on reported experiences here.
GOOD LUCK!!!!!!!
Nippon-Motors: 3 86-88 in stock 750
FC3S.org: NIS
Libero: NIS
Order UP Imports: Checking with Distributor
JTZENTERPRISE.Com: Not importing anymore
JDMCARS.Com: NIS, not expecting anymore
Of 6 importers/distributors contacted, only 3 "confirmed" 86-88 engines in stock. So maybe only 1 or 2 of them are good based on reported experiences here.
GOOD LUCK!!!!!!!
08-13-02, 04:21 PM
#59
Full Member
Join Date: Feb 2002
Location: mass
Posts: 171
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by banzaitoyota
I would rather have diagnosed my 15 year old engine first and made sure I had a viable powerplant BEFORE I bought N1's, Aftermarket rims and suspension. Sounds like putting the cart in front of the horse. Sound like an expensive lesson in the BASICS!
I would rather have diagnosed my 15 year old engine first and made sure I had a viable powerplant BEFORE I bought N1's, Aftermarket rims and suspension. Sounds like putting the cart in front of the horse. Sound like an expensive lesson in the BASICS!
08-14-02, 12:33 AM
#60
pei > caek
Join Date: May 2002
Location: Mars
Posts: 4,643
Likes: 0
Received 0 Likes
on
0 Posts
"Hypntyz7 I was considering you about a week ago.If you offer a 1 year warranty on a 13bt and keep the cost around $1000 your gonna have people lined up at your shop. Ill be 1st in line. "
Ill be second..
Ill be second..
08-14-02, 12:47 AM
#61
Originally posted by dr0x
"Hypntyz7 I was considering you about a week ago.If you offer a 1 year warranty on a 13bt and keep the cost around $1000 your gonna have people lined up at your shop. Ill be 1st in line. "
Ill be second..
"Hypntyz7 I was considering you about a week ago.If you offer a 1 year warranty on a 13bt and keep the cost around $1000 your gonna have people lined up at your shop. Ill be 1st in line. "
Ill be second..
08-14-02, 01:57 AM
#62
Banned. I got OWNED!!!
I dont seriously think that will happen, it would be nice, but extremely un-profitable
I can keep it under $1500 with a warranty, adn that's about it. IT'll still beat anything else out there.
08-14-02, 02:28 AM
#63
Super Raterhater
iTrader: (6)
Join Date: Dec 2001
Location: NY, MA, MI, OR, TX, and now LA or AZ!
Posts: 10,630
Likes: 0
Received 3 Likes
on
3 Posts
Yeah, let Kevin build your engine for you, he's good enough to not need a warranty If I had the cash to send it out, I'd have him do my engine instead of me screwing it up so many times 
(tho I think I finally managed to get it right this time)
If I had the cash to send it out, I'd have him do my engine instead of me screwing it up so many times (tho I think I finally managed to get it right this time)
08-14-02, 03:25 AM
#64
Originally posted by hypntyz7
Yeah no **** guys, help me out here, a little anyway, I gotta eat ya know I can keep it under $1500 with a warranty, adn that's about it. IT'll still beat anything else out there.
Yeah no **** guys, help me out here, a little anyway, I gotta eat ya know
I can keep it under $1500 with a warranty, adn that's about it. IT'll still beat anything else out there.
08-14-02, 03:26 AM
#65
Originally posted by SonicRaT
Yeah, let Kevin build your engine for you, he's good enough to not need a warranty If I had the cash to send it out, I'd have him do my engine instead of me screwing it up so many times (tho I think I finally managed to get it right this time)
Yeah, let Kevin build your engine for you, he's good enough to not need a warranty
If I had the cash to send it out, I'd have him do my engine instead of me screwing it up so many times (tho I think I finally managed to get it right this time)
Plus my car runs, and quite well may I add.
Rat
08-14-02, 09:32 AM
#66
What Subscription?
Updated price:
http://sites.recycler.com/liberousa/inventory.htm
1300!!!!! HAH!!!!!!
SHOW ME PROOF OF 550 Imported motors in stock ready to ship!!!!!!
http://sites.recycler.com/liberousa/inventory.htm
1300!!!!! HAH!!!!!!
SHOW ME PROOF OF 550 Imported motors in stock ready to ship!!!!!!
Thread
Thread Starter
Forum
Replies
Last Post