Was this a good buy?
#1
Full Member
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: Jun 2002
Location: Ottawa, Canada
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Was this a good buy?
ECU scanner
Been having some problems with the throttle and also wanted to get the TPS working poifectly...
Might have issues either with the ECU or the wiring harness.
Has anyone purchased one of these? Any comments??
Thanks!!
Been having some problems with the throttle and also wanted to get the TPS working poifectly...
Might have issues either with the ECU or the wiring harness.
Has anyone purchased one of these? Any comments??
Thanks!!
#2
Looks like same as 2 LED's/3 spade test light you can make yourself from about $5 in Radio Shack parts. They mounted to a panel. If you get 2 LED's and 3 male 1/4 inch spade connectors you connect 2 positives to one spade, each negative to another spade.
#6
Senior Member
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Join Date: Dec 2002
Location: Racing Bear's Tepee
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
If this woman can make one- so can you :-) Take a look at TeamFC3s.org. I believe the instructions are located there. One note: Use different colored LED's. Good Luck!
Trending Topics
#8
Senior Member
![](https://www.rx7club.com/images/misc/15_year_icon.png)
Join Date: Sep 2002
Location: Louisiana
Posts: 613
Likes: 0
Received 0 Likes
on
0 Posts
I reccommend that you solder the connections, just to be safe, but I have even seen people splice the wires and tape them....ghetto when the right way is so simple, but hey it works....hell, I would even make one for you if you want.....let me know
Thread
Thread Starter
Forum
Replies
Last Post