gas gauge not working any ideas whats wrong?
#1
Full Member
Thread Starter
Join Date: Nov 2009
Location: Tacoma, Wa
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
gas gauge not working any ideas whats wrong?
sometimes it will go up to about half way, most of the time on E, any ideas on whats wrong? help appreciated thanks guys
i think its either the fuel sensor or a burnt plug on the harness, id rather hear other peoples inputs before i pull anything out.
i think its either the fuel sensor or a burnt plug on the harness, id rather hear other peoples inputs before i pull anything out.
#2
Boosted. I got BLOWN!!!
iTrader: (29)
My problem was I would read 2/3 and up fine, then it would just read empty. I pulled the level sensor off, then the small cover and noticed the "coil" the sensor arm runs across was completely falling apart. Time for a replacement You can also test it with a multimeter (check resistance) and see if you get full readings all the way across.
Thread
Thread Starter
Forum
Replies
Last Post
smikels
2nd Generation Specific (1986-1992)
3
08-18-15 01:26 PM