Fuel pump cover question....
05-04-08, 05:32 PM
#1
For sale!! PM
Thread Starter
Join Date: Jun 2006
Location: Monroe, MI/Anderson, SC
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Fuel pump cover question....
I had to take my fuel pump cover off and sadly the bolts were rounded b4 i even got to them. My question is where i could find these tiny bolts? i dont just want to get a cover because i have dual walbros and i dont feel like redoing all the wiring and such...
05-04-08, 06:34 PM
#3
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
Aaron Cake(forum member) had something on this.if you Grind the Screw down,and get the cover off,there should be enough to get at with a set of Vice Grips.You can always try to Make Tiny Slots in them with a Dremel,and use a flathead screwdriver,But it is the Fuel tank area..So be Real careful.
05-04-08, 06:38 PM
#4
For sale!! PM
Thread Starter
Join Date: Jun 2006
Location: Monroe, MI/Anderson, SC
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
Aaron Cake(forum member) had something on this.if you Grind the Screw down,and get the cover off,there should be enough to get at with a set of Vice Grips.You can always try to Make Tiny Slots in them with a Dremel,and use a flathead screwdriver,But it is the Fuel tank area..So be Real careful.
05-04-08, 09:47 PM
#5
Do you feel lucky punk!!!
I replaced mine with hex head bolts. I brought the bolts in Autozone, on the hardware area. I think you can find on an hardware store, Pep Boys, Advance Auto, etc.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
ChrisRX8PR
Single Turbo RX-7's
21
10-18-15 04:01 PM