MonkeyMagic

I have been trying to start my engine for the past few days. I traced the no start to the engine getting no fuel. I pulled the injectors and rails off. There is fuel in the rail. I am positive that I put the injector connectors on the right injectors. I tested the injectors with some jumper wires, all are 'clicking' and I can see them opening. Could it be the ECU not triggering them or could it be something else? There is fuel pressure.

88t2romad

how do you know the engine is getting no fuel? Have you checked the plugs after cranking the enigne?

Hows your fuel pressure?

misterstyx69

iTrader: (142)

egi fuse?

MonkeyMagic

the plugs had no fuel on them

egi fuse is good.

MonkeyMagic

misterstyx69 gave me a few things to try, but anyone else have any suggestions?

FirstRotaryExp

iTrader: (3)

Just a stupid idea....but have you gotten your fuel lines crossed? I remember having just such a problem with my motor swap, new engine wouldnt fire. It cranked over for 4 hours, I had spark but no fuel. Turns our the main difference in teh 87 rats nest and teh 88 rats nest was teh fuel lines were reversed.

MonkeyMagic

I put the lines on correct. I followed the lines before I assembled the engine, thanks tho.

turbine

iTrader: (1)

you need to see if you have power to the injectors
if you donot have any testing equiptment you can use a stethascope to to listen for the injectors clicking