2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

fuel, electricle.

Thread Tools
 
Search this Thread
 
Old 08-16-01, 10:02 PM
  #1  
Senior Member

Thread Starter
 
kliftin's Avatar
 
Join Date: Jul 2001
Posts: 256
Likes: 0
Received 0 Likes on 0 Posts
fuel, electricle.

hi, I have the wiring harness installed in my 89 gxl now. The problem now is that it cranks over but does not start. Im wondering if im not getting any fuel. How can I check for fuel with a tester light. Like at the egi box or anything. Any info would be helpful. thnx
Old 08-16-01, 10:09 PM
  #2  
Driving RX7's since 1979

iTrader: (43)
 
HOZZMANRX7's Avatar
 
Join Date: Aug 2001
Location: So Cal where the OC/LA/SB counties meet
Posts: 6,096
Likes: 0
Received 9 Likes on 9 Posts
Check and make sure you didn't hook up your source and return fuel lines backwards. Been there, done that. I'm sure I'm not alone. :-)
Old 08-16-01, 10:19 PM
  #3  
Senior Member

Thread Starter
 
kliftin's Avatar
 
Join Date: Jul 2001
Posts: 256
Likes: 0
Received 0 Likes on 0 Posts
hey

Im sorry but wheres that. Hey, also I Relieved the pressure from the injectors when I had to take the rail off. Do I somehow need to recharge or pressurize the system.
Old 08-16-01, 10:22 PM
  #4  
HAILERS

 
HAILERS's Avatar
 
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 22 Likes on 20 Posts
Pull the plugs and crank the engine over fifteen seconds. Should get a fuel mist out of the plug holes. Small danger here, but not unacceptable. No fuel mist? Jumper the yellow check connector on or near the r/h strut tower, turn the key to the on position but do not start the car. Break a connection on the fuel rail and see if it squirts. Talking one of the banjo bolts. Or get a can of starter fluid and squirt in the intake. If car momentarily turns over its probably a fuel issur. If not an electrical/.
Old 08-16-01, 10:29 PM
  #5  
Driving RX7's since 1979

iTrader: (43)
 
HOZZMANRX7's Avatar
 
Join Date: Aug 2001
Location: So Cal where the OC/LA/SB counties meet
Posts: 6,096
Likes: 0
Received 9 Likes on 9 Posts
Drivers side of the engine bay. The rubber hoses that run from the firewall group of 2 pipes (one fuel supply, other fuel return) to the under EFI assembly of 2 pipes.
Old 08-16-01, 11:31 PM
  #6  
Senior Member

Thread Starter
 
kliftin's Avatar
 
Join Date: Jul 2001
Posts: 256
Likes: 0
Received 0 Likes on 0 Posts
yo

thnx alot.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
bryancmatthews
Power FC Forum
14
10-05-15 08:49 PM
sherff
Adaptronic Engine Mgmt - AUS
5
09-12-15 12:22 PM
Steven_McKinley
General Rotary Tech Support
12
09-05-15 10:48 AM



Quick Reply: fuel, electricle.



All times are GMT -5. The time now is 07:34 AM.