front subframe removal..please help!
#1
Full Member
![](https://www.rx7club.com/images/misc/10_year_icon.png)
Thread Starter
front subframe removal..please help!
ok.... first of all i have searched the archives and googled everything i can think of! i hit a curb almost 5yrs ago and my 7 hasnt been on the road since. i recently purchased the front subframe which is why my car has been garaged but after removing all visible bolts i still cant budge it. is it tack welded or are there hidden bolts that im not seeing? any info would be greatly appreciated!
#2
There are only 4 bolts that hold the subframe on. Whack it with a hammer or pry between the subframe and frame.
To drop the whole front end there is only 4 bolts on top of each strut, 4 on the subframe, 4 on the swaybar mounts and the two brake lines. Then the steering column splined shaft and if you have power steering those hoses.
To drop the whole front end there is only 4 bolts on top of each strut, 4 on the subframe, 4 on the swaybar mounts and the two brake lines. Then the steering column splined shaft and if you have power steering those hoses.
Thread
Thread Starter
Forum
Replies
Last Post
JIMMY54
1st Generation Specific (1979-1985)
2
08-12-15 05:40 PM