fixing my 5 and 6th ports...my way...?
#1
CenFlaRXClub
Thread Starter
Join Date: Feb 2006
Location: Orlando FL
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
fixing my 5 and 6th ports...my way...?
Ok my 5th and 6th ports were not opening at any rpm...so what i did was pulled off the wiring from the sileniod and the 2 vac hoses. I plugged the hose that was adjecent to the air filter on the sileniod to where the other tube off the sileniod (was perpendicular the the airfilter and main tube) was plugged in. Now everything is working fine (actuators are opening around 3800)...And i have one less sileniod to worry about...
my question is...is this going to screw anything else in my engine up...I have seen no problems as of yet anywhere...should i be wary of anything?
-Craig
my question is...is this going to screw anything else in my engine up...I have seen no problems as of yet anywhere...should i be wary of anything?
-Craig
Trending Topics
#10
Play Well
Join Date: Feb 2005
Location: We're all fine here now, thank you. How are you?
Posts: 4,218
Likes: 0
Received 0 Likes
on
0 Posts
He didnt say S4 or S5 but by saying wiring harness I would guess S5 seeing how they are opened by 2 noids. They dont have to worry about not running a cat.
#13
CenFlaRXClub
Thread Starter
Join Date: Feb 2006
Location: Orlando FL
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
ill get pics tonight...yes my airpump is still on (everyone i ask says it only sucks less than 1 hp so im not worried about removing it...ill get you more info on the whole process tonight...DEFF. easier than anything i have read about fixing it on this forum...more later...
#17
Lives on the Forum
I tried that when I was diagnosing why my 6 ports weren't working, but it opened for me at just over idle (1500?). If it really is opening at 3800 I don't really see a problem with it, other than it could possibly be incosistent. With mine the problem was that the ECU wasn't triggering the solenoid any more, so I wired in a Summit Racing adjustable RPM switch, and they work fine now. Many people run with the ports wired open with no problems other than a reduction in drivability and power at low rpm's.
#18
Play Well
Join Date: Feb 2005
Location: We're all fine here now, thank you. How are you?
Posts: 4,218
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cool_as_crap
your thinking of s4
#19
CenFlaRXClub
Thread Starter
Join Date: Feb 2006
Location: Orlando FL
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
not sure if mine were open or closed....i assume open cause i had no low end...ran rich...and the actuator rods stayed down...but i promise you they are consistently running open by 4k rpms...generally start to open at 3.8k
#20
Lives on the Forum
The aux ports on the S5 are electronically controlled, but the mechanical force used to open them comes from the airpump. The airpump supplies pressurised air (~3psi) to a solenoid, the ECU tells the solenoid to open, allowing air to go to the aux port actuators, and then the air pressure pushes on a diaphragm which moves the actuator rod to open the ports.
The S5 most definetely needs the airpump for the aux ports and the VDI to funtion.
If you don't beleive me, then go and look at the port actuators yourself. There's no electrical connections anywhere on there, there's just the air hose. You can also consult the Haynes manual or the factory service manual.
I've seen someone who did a fully electrical system, but that was a one off custom built thing, and I've only seen the one person do it. There's also others who've taken off the stock airpump and fitted an electrical pump to open the ports, but again, those are custom jobs, but that's still airpump activated ports.
Every single stock S5 and most (>99%) of the modified ones use the airpump to open the ports. That's a fact, no matter how many times you post otherwise.
The S5 most definetely needs the airpump for the aux ports and the VDI to funtion.
If you don't beleive me, then go and look at the port actuators yourself. There's no electrical connections anywhere on there, there's just the air hose. You can also consult the Haynes manual or the factory service manual.
I've seen someone who did a fully electrical system, but that was a one off custom built thing, and I've only seen the one person do it. There's also others who've taken off the stock airpump and fitted an electrical pump to open the ports, but again, those are custom jobs, but that's still airpump activated ports.
Every single stock S5 and most (>99%) of the modified ones use the airpump to open the ports. That's a fact, no matter how many times you post otherwise.
#22
Banned. I got OWNED!!!
Originally Posted by CrypticApathy
i just wiretied mine open. i didnt notice much of a diffrence in lowend power. i did in high end power though.
#24
Play Well
Join Date: Feb 2005
Location: We're all fine here now, thank you. How are you?
Posts: 4,218
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Black91n/a
The aux ports on the S5 are electronically controlled, but the mechanical force used to open them comes from the airpump. The airpump supplies pressurised air (~3psi) to a solenoid, the ECU tells the solenoid to open, allowing air to go to the aux port actuators, and then the air pressure pushes on a diaphragm which moves the actuator rod to open the ports.
The S5 most definetely needs the airpump for the aux ports and the VDI to funtion.
If you don't beleive me, then go and look at the port actuators yourself. There's no electrical connections anywhere on there, there's just the air hose. You can also consult the Haynes manual or the factory service manual.
I've seen someone who did a fully electrical system, but that was a one off custom built thing, and I've only seen the one person do it. There's also others who've taken off the stock airpump and fitted an electrical pump to open the ports, but again, those are custom jobs, but that's still airpump activated ports.
Every single stock S5 and most (>99%) of the modified ones use the airpump to open the ports. That's a fact, no matter how many times you post otherwise.
The S5 most definetely needs the airpump for the aux ports and the VDI to funtion.
If you don't beleive me, then go and look at the port actuators yourself. There's no electrical connections anywhere on there, there's just the air hose. You can also consult the Haynes manual or the factory service manual.
I've seen someone who did a fully electrical system, but that was a one off custom built thing, and I've only seen the one person do it. There's also others who've taken off the stock airpump and fitted an electrical pump to open the ports, but again, those are custom jobs, but that's still airpump activated ports.
Every single stock S5 and most (>99%) of the modified ones use the airpump to open the ports. That's a fact, no matter how many times you post otherwise.
You cn do away with the air pump and just have a RPM switch.