Finishing up block off plates. Need help with boost nipple.
#1
Senior Member
Thread Starter
Join Date: Mar 2001
Location: Centralia, WA, USA
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
Finishing up block off plates. Need help with boost nipple.
Well, Im finishing up my block off plates, and I've seen that some people kept a nipple on the block off for the egr or avc....(whaver the big one is on the lower intake so that they could still plug the boost pressure sensor hose in.
Is that nesseccary? Or could I just use the nipple I have right on the bottom of the upper intake??
Thanks
I've also removed all the selonoids, including the fuel rail. I've read that I just need to plumb a vac line from the seconary fuel rail to another source. Can I use one of the nipples coming off the side of the upper intake? Or does it have to be a specific vac source.
Is that nesseccary? Or could I just use the nipple I have right on the bottom of the upper intake??
Thanks
I've also removed all the selonoids, including the fuel rail. I've read that I just need to plumb a vac line from the seconary fuel rail to another source. Can I use one of the nipples coming off the side of the upper intake? Or does it have to be a specific vac source.
#4
if u have a turbo, Tee it off with ur blowoff valve, if not, jsut find anywhere to tee it off too, or plug it up to any vacuum nipple after the throttle body, get longer hose if needed.
ut
ut
Thread
Thread Starter
Forum
Replies
Last Post