FD wheels on a FC
#1
addict
Thread Starter
iTrader: (2)
Join Date: May 2007
Location: PA
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
FD wheels on a FC
Anyone out there have any info on hubcentric wheel adaptors for a FC for FD Wheels. I have a 87 that im turning into a track car and I want to use a set of speedline wheels with slicks from my FD. I searched the forum but I didn't find anything useful.......thanks
#2
Rx2 > FD
iTrader: (10)
it takes a set of adapters with atleast 20mm up front and 2o in the rear. i have FD wheels on my FC and have 20mm up front and 25mm in the back. i would reccomend wider than 20mm up front. my 225 tires rub the springs.
also, my front adapters came with a hubcentric machind in. but i had to get some hubcentric rings for the rear. got them off ebay.
also, my front adapters came with a hubcentric machind in. but i had to get some hubcentric rings for the rear. got them off ebay.
#4
Former Moderator. RIP Icemark.
Thread closed, covered in the FAQ for FC sticky thread found both at the top of this section as well as the new member technical section, and in the archive and in countless other posts.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM