fd flywheel, will it work on a turbo FC?
11-16-05, 07:45 AM
#1
I have injector envy!
Thread Starter
fd flywheel, will it work on a turbo FC?
I have a turbo s4 and was curious that if I use the s4 auto counterweight would the FD act flywheel bolt up and work properly?
11-16-05, 10:21 AM
#3
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
The flywheel should fit the counterweight flange, but I don't know if the clutch cover (pressure plate) will.
It might, but you're going to have to test it.
It might, but you're going to have to test it.
11-16-05, 10:35 AM
#5
Seduced by the DARK SIDE
Join Date: Apr 2001
Location: Orange Park FL (near Jax)
Posts: 7,323
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by 10aeturbo2
i have an s4 as well. When i rebuilt my motor last, i used an fd flywheel BUT , the rotors and counterwieght was used as well so it would all match up.
11-16-05, 12:45 PM
#6
I have injector envy!
Thread Starter
had a chance to check act's part #'s
same part number for a 87-96 turbo rx-7 for the flywheel. clutch and pp are a different story. So if I get the FD flywheel (used) with a S4 counterweight and a S4 clutch and PP all should be good!
same part number for a 87-96 turbo rx-7 for the flywheel. clutch and pp are a different story. So if I get the FD flywheel (used) with a S4 counterweight and a S4 clutch and PP all should be good!
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM
