FC3drift's Bullet Proof 13b-t build
#1
Displacement Replacement
Thread Starter
iTrader: (5)
Join Date: Apr 2007
Location: St. Thomas
Posts: 1,502
Likes: 0
Received 0 Likes
on
0 Posts
FC3drift's Bullet Proof 13b-t build
I've been working on my car for the last few weekends.I figure I should make a build thread.
I took my car to the road course and blew and oil line and ended up locking up my engine, luckily i was planning on freshening it up and already had the rebuild kit.
I knew the eccentric shaft and stationary gears would be screwed, so i picked up a spare S5 TII keg with a chipped apex seal on the rear rotor, i tore that apart and found a huge *** dent on the rear rotor, everything but the rear rotor and housing were literally brand new
heres some pics of the rotor
the next weekend i pulled my motor out of my car and tore it apart and was surprised to see 3mm apex seals, solid 3mm corner seals, 7 window rear stationary gear bearing, luckily only the front stationary gear main bearing had siezed. it took a bit of playing around to finally get it apart.i ended up pulling the main bearing, which was siezed to the eccentric shaft, right out of the stationary gear. then i had to cut a few slits in the bearing and literally peel it off the eccentric shaft with a chisel and a hammer
pics of the rear main bearing
My engine also had the extra thick casting around the rear dowel by the oil filter, you can see the differance compared to a regular S5 rear iron
a pic of my OS Giken Twin disk clutch
engine pic
Anyways I been just working away cleaning everything. I have all my parts ordered so everything should be showing up within the next week and i can start rebuilding.
My build list
S5 TII engine
Rotary Aviation Basic rebuild kit
3mm RA "Super Seals"
new OEM 3mm apex seal springs for GSL-SE
New OEM 3mm solid corner seals from Pre 76 13b's
Pineapple Racing Medium Streetport and EP2 templates
7 window rear main bearing
extra beefy rear iron
should be a nice strong reliable engine when its all done, Bullet proof for my power levels
More pics comming soon
I took my car to the road course and blew and oil line and ended up locking up my engine, luckily i was planning on freshening it up and already had the rebuild kit.
I knew the eccentric shaft and stationary gears would be screwed, so i picked up a spare S5 TII keg with a chipped apex seal on the rear rotor, i tore that apart and found a huge *** dent on the rear rotor, everything but the rear rotor and housing were literally brand new
heres some pics of the rotor
the next weekend i pulled my motor out of my car and tore it apart and was surprised to see 3mm apex seals, solid 3mm corner seals, 7 window rear stationary gear bearing, luckily only the front stationary gear main bearing had siezed. it took a bit of playing around to finally get it apart.i ended up pulling the main bearing, which was siezed to the eccentric shaft, right out of the stationary gear. then i had to cut a few slits in the bearing and literally peel it off the eccentric shaft with a chisel and a hammer
pics of the rear main bearing
My engine also had the extra thick casting around the rear dowel by the oil filter, you can see the differance compared to a regular S5 rear iron
a pic of my OS Giken Twin disk clutch
engine pic
Anyways I been just working away cleaning everything. I have all my parts ordered so everything should be showing up within the next week and i can start rebuilding.
My build list
S5 TII engine
Rotary Aviation Basic rebuild kit
3mm RA "Super Seals"
new OEM 3mm apex seal springs for GSL-SE
New OEM 3mm solid corner seals from Pre 76 13b's
Pineapple Racing Medium Streetport and EP2 templates
7 window rear main bearing
extra beefy rear iron
should be a nice strong reliable engine when its all done, Bullet proof for my power levels
More pics comming soon
#4
Displacement Replacement
Thread Starter
iTrader: (5)
Join Date: Apr 2007
Location: St. Thomas
Posts: 1,502
Likes: 0
Received 0 Likes
on
0 Posts
350-380whp
I dynoed 361whp 309ft-lbs in april on this set up
I gotta see how much the Pineapple streetport adds
I basically just want the same power level but with a bit less boost
I dynoed 361whp 309ft-lbs in april on this set up
I gotta see how much the Pineapple streetport adds
I basically just want the same power level but with a bit less boost
#6
Displacement Replacement
Thread Starter
iTrader: (5)
Join Date: Apr 2007
Location: St. Thomas
Posts: 1,502
Likes: 0
Received 0 Likes
on
0 Posts
My Streetport Templates Came Today!!!
pineapple racing medium streetport and EP2a exhaust port
I started one of the Primaries, it looks like crap in this picture, it actually looks really good in person. its not finished
pineapple racing medium streetport and EP2a exhaust port
I started one of the Primaries, it looks like crap in this picture, it actually looks really good in person. its not finished
Trending Topics
#12
Displacement Replacement
Thread Starter
iTrader: (5)
Join Date: Apr 2007
Location: St. Thomas
Posts: 1,502
Likes: 0
Received 0 Likes
on
0 Posts
Im waiting for my RA super seals to come in, Im hoping next weekend. I got all my little random o-ring's new oem gsl-se apex springs, new oem 3mm solid corner seals last week.
RA was letting me exhange my seals i went to send them back and cheaped out trying to save $20 with fedex ground, they said they would have them there in a week, but i messed up the customs paperwork and they were on clearance delay in missisauga since June 30th they had to clarify something but had a long weekend. long story short they were saying they wouldnt be delivered till july 15th so i told them to return the package and i just finally got it back today after messing around on the phone with fedex for 2 days..... they even charged me $9 to return it even tho i paid for shipping to florida and it made it to missisauga. i sent them out next day delivery purolator for $45 so I hope i have them ready to go for next weekend
I used my Mommy's CAA.....so $0 the tow truck driver said it would have been 4-$500 tow
my moms CAA is good for 150kms, and luckily my house is 120kms away hahaha
Can you guess what my mom got me for my birthday last week?
RA was letting me exhange my seals i went to send them back and cheaped out trying to save $20 with fedex ground, they said they would have them there in a week, but i messed up the customs paperwork and they were on clearance delay in missisauga since June 30th they had to clarify something but had a long weekend. long story short they were saying they wouldnt be delivered till july 15th so i told them to return the package and i just finally got it back today after messing around on the phone with fedex for 2 days..... they even charged me $9 to return it even tho i paid for shipping to florida and it made it to missisauga. i sent them out next day delivery purolator for $45 so I hope i have them ready to go for next weekend
I used my Mommy's CAA.....so $0 the tow truck driver said it would have been 4-$500 tow
my moms CAA is good for 150kms, and luckily my house is 120kms away hahaha
Can you guess what my mom got me for my birthday last week?
#13
Displacement Replacement
Thread Starter
iTrader: (5)
Join Date: Apr 2007
Location: St. Thomas
Posts: 1,502
Likes: 0
Received 0 Likes
on
0 Posts
I got my engine built!!! This was my first time building an engine... it turns over by hand and makes good compression so i hope everything is good. I used RR rebuild pdf and the FSM, and a haynes for referance while building.
I've been busy as hell with work then workin on the engine I haven't had a chance to update my thread. The actual build went pretty smooth, I built it up in my head to be alot harder than it actually was. I heard of guys having problems with lining up the oil pump chain sprockets??? hahaha I got it first try within 30 seconds , I set the end play today and got the front cover, I had 2 "K" spacers which gave me .0035, so I sanded one down with a sheet of 400 grit, till i got .0020 endplay
I spent alot of my time today cleaning and painting little odds and ends,
All thats left to install tomorrow is
the turbo
lower IM
OMP
water pump housing
fuel injectors and lines
set the clutch up.
put it back in the car and hook it all back up
anyways here's some pictures
housings all painted
engine all painted waiting to be assembled
clean rotors
3mm solid corner seals
3mm RA Super Seals crazy glued together
my engine stand
it makes good compression check out the video
http://www.youtube.com/watch?v=8qvLKnOkCiw
I've been busy as hell with work then workin on the engine I haven't had a chance to update my thread. The actual build went pretty smooth, I built it up in my head to be alot harder than it actually was. I heard of guys having problems with lining up the oil pump chain sprockets??? hahaha I got it first try within 30 seconds , I set the end play today and got the front cover, I had 2 "K" spacers which gave me .0035, so I sanded one down with a sheet of 400 grit, till i got .0020 endplay
I spent alot of my time today cleaning and painting little odds and ends,
All thats left to install tomorrow is
the turbo
lower IM
OMP
water pump housing
fuel injectors and lines
set the clutch up.
put it back in the car and hook it all back up
anyways here's some pictures
housings all painted
engine all painted waiting to be assembled
clean rotors
3mm solid corner seals
3mm RA Super Seals crazy glued together
my engine stand
it makes good compression check out the video
http://www.youtube.com/watch?v=8qvLKnOkCiw
#17
Junior Member
Join Date: Jun 2010
Location: San Bernardino, CA (909)
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
lol the bucket, looks like it worked out pretty good.N ice work i want to rebuild mine just to do it..maybe later in the year.
hope all goes well when using it.
hope all goes well when using it.
#21
Displacement Replacement
Thread Starter
iTrader: (5)
Join Date: Apr 2007
Location: St. Thomas
Posts: 1,502
Likes: 0
Received 0 Likes
on
0 Posts
I got the engine in today, fired right up first try!!!!!!!!!!!!!!!!! i needed a new alt belt cuz i had cut the other one when it first messed up, but i used a old messed up one, and it was sqealing like a mother f-er so i had to shut it off. it was dark so i just called it a day, i atleast got to hear it run which makes me happy . I'll go over everything and have it purring like a kitten tomorrow. I'll have some better pics and everything too
here's the video of its first time starting...... listen to how quick it starts!!!!
http://www.youtube.com/watch?v=3nvbXZj63XA
i'll post some pics later on when i upload them
here's the video of its first time starting...... listen to how quick it starts!!!!
http://www.youtube.com/watch?v=3nvbXZj63XA
i'll post some pics later on when i upload them
#23
Displacement Replacement
Thread Starter
iTrader: (5)
Join Date: Apr 2007
Location: St. Thomas
Posts: 1,502
Likes: 0
Received 0 Likes
on
0 Posts
I got a new alternator belt, and it fired right up todaym now more squealin
Purr's like a kitten. should be a pretty strong motor once its broken in
look at this 2nd time attempting to start it.....last night was the first
http://www.youtube.com/watch?v=vD1LyWz37kM
start up with it running for longer
http://www.youtube.com/watch?v=5f0l6xVWQPA
and the exhaust
http://www.youtube.com/watch?v=bhwBk1yTTDA
Purr's like a kitten. should be a pretty strong motor once its broken in
look at this 2nd time attempting to start it.....last night was the first
http://www.youtube.com/watch?v=vD1LyWz37kM
start up with it running for longer
http://www.youtube.com/watch?v=5f0l6xVWQPA
and the exhaust
http://www.youtube.com/watch?v=bhwBk1yTTDA