factory security system
#1
Full Member
Thread Starter
Join Date: Sep 2003
Location: abilene(shithole)texas
Posts: 142
Likes: 0
Received 0 Likes
on
0 Posts
factory security system
how does the factory security system on my 86 gxl work? specifically what sets it off and how to turn it off and also what it does, like flashes lights and beeps or what?
#2
Former Moderator. RIP Icemark.
Please use the search function, as this has been covered many times.
The stock alarm uses the key in the door to disarm. They arm by locking the latch on the inside of the door.
The stock alarm uses the key in the door to disarm. They arm by locking the latch on the inside of the door.
#4
Former Moderator. RIP Icemark.
The stock system arms when you lock both doors from the inside. You must (of course) hold the outside drivers door handle up when locking, so that the door remains locked when you close the door.
To disarm, use the key in the door, turning it to the unlock position.
The system triggers by a door or the hatch/trunk being opened without the key or the ignition being turned on.
The system will kill the starter, honk the horn, and flash the turn signals when triggered.
To disarm, use the key in the door, turning it to the unlock position.
The system triggers by a door or the hatch/trunk being opened without the key or the ignition being turned on.
The system will kill the starter, honk the horn, and flash the turn signals when triggered.
#6
On the prowl for an FB
iTrader: (1)
Join Date: Sep 2002
Location: Surrounded by Sebey parts, Rhode Island
Posts: 2,932
Likes: 0
Received 6 Likes
on
4 Posts
The alarm is wired into the button on the chassis controls your interior lights when the door is opened or closed... Hence, if yours only works intermittently (like mine) your factory security system won't work very well either.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
acha3
2nd Generation Specific (1986-1992)
7
09-06-15 08:14 AM