Electrical Problems Aussie Car
03-29-05, 11:05 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2001
Location: Tecoma Australia
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Electrical Problems Aussie Car
Can anyone help?
I have 1987 series 4 with the electrical gremlins, about to go the cpu change over.
This fault is bugging me, door ajar light remains on, both door lights also remain on.
Checked door switches, earth points, display module joints have been previously resoldered, wiring looms looks ok.
Any clues what is causing this, or what else would cause this to occur?
Regards
Dave.
I have 1987 series 4 with the electrical gremlins, about to go the cpu change over.
This fault is bugging me, door ajar light remains on, both door lights also remain on.
Checked door switches, earth points, display module joints have been previously resoldered, wiring looms looks ok.
Any clues what is causing this, or what else would cause this to occur?
Regards
Dave.
03-29-05, 11:39 PM
#3
Junior Member
Thread Starter
Join Date: Nov 2001
Location: Tecoma Australia
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Yes works in the 3 positions, but if left in the right hand position the light will not go out when the door is closed.
All other buttons/features in dome switch group work as expected.
Dave
All other buttons/features in dome switch group work as expected.
Dave
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM