Electrical issue
02-01-12, 03:56 PM
#1
Full Member
Thread Starter
Join Date: May 2005
Location: East Oregon
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Electrical issue
87 n/a
152k
Was running, but started sputtering a while back - would cavitate, eventually topping out at 4k. Now has problems starting, won't run.
Battery fully charged
Tested cas - in tolerances
Coil getting 0 volts when testing b/y and ground at connector, yet going across was getting -12 volts, key on both attempts.
No spark on leading or trailing.
152k
Was running, but started sputtering a while back - would cavitate, eventually topping out at 4k. Now has problems starting, won't run.
Battery fully charged
Tested cas - in tolerances
Coil getting 0 volts when testing b/y and ground at connector, yet going across was getting -12 volts, key on both attempts.
No spark on leading or trailing.
02-01-12, 04:16 PM
#2
87 n/a
152k
Was running, but started sputtering a while back - would cavitate, eventually topping out at 4k. Now has problems starting, won't run.
Battery fully charged
Tested cas - in tolerances
Coil getting 0 volts when testing b/y and ground at connector, yet going across was getting -12 volts, key on both attempts.No spark on leading or trailing.
152k
Was running, but started sputtering a while back - would cavitate, eventually topping out at 4k. Now has problems starting, won't run.
Battery fully charged
Tested cas - in tolerances
Coil getting 0 volts when testing b/y and ground at connector, yet going across was getting -12 volts, key on both attempts.No spark on leading or trailing.
Thread
Thread Starter
Forum
Replies
Last Post