ecu question
#1
Junior Member
Thread Starter
Join Date: Apr 2002
Location: virgina
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
ecu question
I know it is long but please read it for the sake of an rx7
Hey first of all i would like to say that i am a
relitiveley new owner of rx7s and i alredey love them. But my question is i have done extinsive tests on my tps bac valve and solonoid the abc valve and solonoid ,the three major players in controling the idle of my rx7. Oh yea i am trying to fix my 1800 idle on my completley stock (for the moment) rx7 so i know my mods are not doing it. Any how one test i performed via team fc3s web site is testing the ecu by puting a 1/4 wat 10 ohm resistor across the bac valves terminal and meshuring the ac voltage with the car in the on position my readings were not in the green (in fact way off). The same web site has a e-mail address with the guy who actualy fixed his ecu by sodering a new transistor that controls the bac valve but i cant get a hold of him and was wondering if any of you rx7 grues could help me out on this one caus i am no rocket scientist when it comes to bare mother bords any help would be gretley appreciated thanx
Hey first of all i would like to say that i am a
relitiveley new owner of rx7s and i alredey love them. But my question is i have done extinsive tests on my tps bac valve and solonoid the abc valve and solonoid ,the three major players in controling the idle of my rx7. Oh yea i am trying to fix my 1800 idle on my completley stock (for the moment) rx7 so i know my mods are not doing it. Any how one test i performed via team fc3s web site is testing the ecu by puting a 1/4 wat 10 ohm resistor across the bac valves terminal and meshuring the ac voltage with the car in the on position my readings were not in the green (in fact way off). The same web site has a e-mail address with the guy who actualy fixed his ecu by sodering a new transistor that controls the bac valve but i cant get a hold of him and was wondering if any of you rx7 grues could help me out on this one caus i am no rocket scientist when it comes to bare mother bords any help would be gretley appreciated thanx
Thread
Thread Starter
Forum
Replies
Last Post
Skeese
Adaptronic Engine Mgmt - AUS
65
03-28-17 03:30 PM
CaptainKRM
2nd Generation Specific (1986-1992)
14
08-26-15 09:52 PM