Dual Throttle Body
#28
We simply ran a brake cable from a bike across the throttle bodies. Yes, the car is going to suck in the air it needs, but it can potentionally suck in more air this way due to more air being readily available. Like i said, i rode with him and i did feel a power increase in his car. By the way, it would take a tig welder to weld an intake manifold, they're aluminum. I'm not sure where to find a tig welder.
quote from O 16581 72452 5
I'm a welder and just for a little insight to the conversation, just because it is alluminum doesn't mean you have too tig weld it you can also mig weld it, and there are a couple other methods, oh and we probably sound cocky too you only because some people in here know what there talking about, i can't say i'm one of them, ha ha
quote from O 16581 72452 5
I'm a welder and just for a little insight to the conversation, just because it is alluminum doesn't mean you have too tig weld it you can also mig weld it, and there are a couple other methods, oh and we probably sound cocky too you only because some people in here know what there talking about, i can't say i'm one of them, ha ha
#30
Lives on the Forum
Originally posted by blackdiamond
We simply ran a brake cable from a bike across the throttle bodies. Yes, the car is going to suck in the air it needs, but it can potentionally suck in more air this way due to more air being readily available. Like i said, i rode with him and i did feel a power increase in his car. By the way, it would take a tig welder to weld an intake manifold, they're aluminum. I'm not sure where to find a tig welder.
We simply ran a brake cable from a bike across the throttle bodies. Yes, the car is going to suck in the air it needs, but it can potentionally suck in more air this way due to more air being readily available. Like i said, i rode with him and i did feel a power increase in his car. By the way, it would take a tig welder to weld an intake manifold, they're aluminum. I'm not sure where to find a tig welder.
quote from O 16581 72452 5
I'm a welder and just for a little insight to the conversation, just because it is alluminum doesn't mean you have too tig weld it you can also mig weld it, and there are a couple other methods, oh and we probably sound cocky too you only because some people in here know what there talking about, i can't say i'm one of them, ha ha
I'm a welder and just for a little insight to the conversation, just because it is alluminum doesn't mean you have too tig weld it you can also mig weld it, and there are a couple other methods, oh and we probably sound cocky too you only because some people in here know what there talking about, i can't say i'm one of them, ha ha
Boy, aren't we looking smart today...
I'd file this whole thread in the bullshit bin.  The FC's run some of the biggest TB area for it's engine size.  The restriction is not in the TB itself - look in the exhaust or engine porting for better gains.
-Ted
#31
In Full Autist Cosplay
iTrader: (1)
Join Date: Nov 2002
Location: Alberta
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by O 16581 72452 5
I'm glad i didn't buy an FC, i don't want to be part of this cocky group of people.
I'm glad i didn't buy an FC, i don't want to be part of this cocky group of people.
For the record I don't think on an RX7 it would yeild much gain, the TB is already huge, IMO. I looked into using a single plated TB from a beefy GM V8 in conjunction for a future EMS, and after close comparison from the size of the V8 TB, I realised the stock TB is freaking huge for all of 1.3 litres. From what I can see also it's much better off using the stock TB as it's (probably) got a much better flow and volume for the way the runners all bolt up. I haven't yet started a thread about using a customized non-stock based TB though, so I can't give you much more information that just what I have observed.
#33
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
Originally posted by Black13B
There are a select few of regulars in this forum that are real morons.
There are a select few of regulars in this forum that are real morons.
#34
In Full Autist Cosplay
iTrader: (1)
Join Date: Nov 2002
Location: Alberta
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Evil Aviator
Yes, and they always blindly jump on the bandwagon to support dumb ideas, and get upset when the more educated and experienced forum members criticize the dumb ideas. See also the threads on the air pump supercharger and the electrically-controlled Tesla supercharger.
Yes, and they always blindly jump on the bandwagon to support dumb ideas, and get upset when the more educated and experienced forum members criticize the dumb ideas. See also the threads on the air pump supercharger and the electrically-controlled Tesla supercharger.
I read that thread, actually.. It was pretty funny..
It must be why so many guru's get so embittered after being here so long..
#35
Ga-nome liberator
Join Date: Jul 2002
Location: Hell
Posts: 1,990
Likes: 0
Received 0 Likes
on
0 Posts
I have a question isn't timing greatly affected by the length, shape, volume, etc of the manifold? Maybe I was wrong on where I read this, but if you added a second tb on the actual manifold wouldn't that cause big timing issues? And if that were true there would be no way to accurately adjust timing for both rotors to run right. This is just on the basis that timing is greatly affected by the manifold, so please if I'm wrong point it out.
- Steiner
- Steiner
#36
I'm bastardizing my car!
Join Date: Sep 2002
Location: Naperville, IL.
Posts: 1,258
Likes: 0
Received 0 Likes
on
0 Posts
for this to work well on our cars, we would need a whole new intake manifold. At that point, it would prolly be better to go get an aftermarket edelbrock throttle body for a big v-8. have you seen what our throttle bodys look like?
#37
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,791
Likes: 0
Received 114 Likes
on
96 Posts
I don't even know what to say...
The throttle body on an RX-7 is not a restriction. It is the rest of the engine (ports).
Even if it was, you would see better results using a larger aftermarket throttle body, as well as saving the weight and complication of putting another FC throttle body on the intake....
Connecting an AFM in parallel with another AFM is just plain dump. Resistors in parallel behave in a certain way, defined by Rt=(R1 x R2)/(R1 + R2) ). It is not a linear relationship. I can only imagine how this would confuse the hell out of the ECU...
The throttle body on an RX-7 is not a restriction. It is the rest of the engine (ports).
Even if it was, you would see better results using a larger aftermarket throttle body, as well as saving the weight and complication of putting another FC throttle body on the intake....
Connecting an AFM in parallel with another AFM is just plain dump. Resistors in parallel behave in a certain way, defined by Rt=(R1 x R2)/(R1 + R2) ). It is not a linear relationship. I can only imagine how this would confuse the hell out of the ECU...
#38
I would bet that if you carbed a fc with this guys duel setup he made it would spank the **** out of 85% of the NA's on this forum. Keep up the good work on fabing your own equipment. Don't stop trying things because someone thinks its stupid.
#39
Lives on the Forum
Originally posted by Bukwild
I would bet that if you carbed a fc with this guys duel setup he made it would spank the **** out of 85% of the NA's on this forum. Keep up the good work on fabing your own equipment. Don't stop trying things because someone thinks its stupid.
I would bet that if you carbed a fc with this guys duel setup he made it would spank the **** out of 85% of the NA's on this forum. Keep up the good work on fabing your own equipment. Don't stop trying things because someone thinks its stupid.
-Ted
#41
Rotorhead
Join Date: Feb 2001
Location: Charlottesville, Virginia, USA
Posts: 9,136
Likes: 0
Received 39 Likes
on
33 Posts
Originally posted by RETed
I think this guy is a motivational speaker...
-Ted
I think this guy is a motivational speaker...
-Ted
Um, does that mean the the carb duels against the two throttle bodies, or that the carbs go onto the two throttle bodies that are dueling each other for signal values to the EMS, or what? Nevermind, I'm going to spend lots of time and money ruining my car even if I don't know what I'm doing!
Oh, one more thing, does anybody know where I can buy JB Weld by the gallon, or can I just use Liquid Nails?
#43
The infamous number guy!
Thread Starter
Join Date: Dec 2002
Location: Terre Haute, IN.
Posts: 1,953
Likes: 0
Received 0 Likes
on
0 Posts
Heh, this thread is still alive. Read the comments in that link, the FB owners were supportive, not cocky. It was just an idea for someone that had extra parts laying around.
#46
Haven't we ALL heard this
Man, sometimes this forum is sad. Why do you guys gotta hate like that?
Just because somebody does something different does not mean it is incorrect. So how many of you guys have used JBweld before? Or have you heard from somebody by somebody by somebody on forum that it is bad. Using it on my TB mod with no prob.
The burden of proof is on O 16581 72452 5 to prove it. So why don't you let him instead of sounding like an *** like this forum is turning into?
James
Just because somebody does something different does not mean it is incorrect. So how many of you guys have used JBweld before? Or have you heard from somebody by somebody by somebody on forum that it is bad. Using it on my TB mod with no prob.
The burden of proof is on O 16581 72452 5 to prove it. So why don't you let him instead of sounding like an *** like this forum is turning into?
James
#47
The infamous number guy!
Thread Starter
Join Date: Dec 2002
Location: Terre Haute, IN.
Posts: 1,953
Likes: 0
Received 0 Likes
on
0 Posts
I never said it would work on an Rx-7, but it was proven to work great on another car.
The S-AFC has a setting on it so it can process both of the signals.
Originally posted by Aaron Cake
Connecting an AFM in parallel with another AFM is just plain dump. Resistors in parallel behave in a certain way, defined by Rt=(R1 x R2)/(R1 + R2) ). It is not a linear relationship. I can only imagine how this would confuse the hell out of the ECU...
Connecting an AFM in parallel with another AFM is just plain dump. Resistors in parallel behave in a certain way, defined by Rt=(R1 x R2)/(R1 + R2) ). It is not a linear relationship. I can only imagine how this would confuse the hell out of the ECU...
Last edited by O 16581 72452 5; 10-04-03 at 05:07 PM.
#48
Displacement > Boost
Join Date: Oct 2002
Location: Mississippi
Posts: 3,503
Likes: 0
Received 0 Likes
on
0 Posts
This forum is where hating flourishes. Go to Nopistons.com if you want any kind of consistent moral support. Sure, they'll rip you up for fun but not in a cocky way. They call this forum a **** camp!
#49
Lives on the Forum
Originally posted by O 16581 72452 5
I never said it would work on an Rx-7, but it was proven to work great on another car.
I never said it would work on an Rx-7, but it was proven to work great on another car.
-Ted
#50
Lives on the Forum
Originally posted by Wankel7
Just because somebody does something different does not mean it is incorrect. So how many of you guys have used JBweld before? Or have you heard from somebody by somebody by somebody on forum that it is bad. Using it on my TB mod with no prob.
Just because somebody does something different does not mean it is incorrect. So how many of you guys have used JBweld before? Or have you heard from somebody by somebody by somebody on forum that it is bad. Using it on my TB mod with no prob.
If someone says..."if one turbo is great, why not run two turbos?"  I bet you would've fell off your chair.  The whole online community is usally nasty - if you've found a good one, then count yourself lucky.  Having it unmoderated (to a point) allows all kinds of leeway in terms of posting and replies - this one should've been deleted for being totally inappropriate in the first place.  Society has degraded ourselves into turning more hostile than more friendly - too much **** gets posted and claimed online.  Do you disagree?  I will sometime lose my cool and post something nasty - it's more frustration that anything.
-Ted