Does anyone have experience with these DTSS Eliminator Bushings?
I picked them up on the forum about six months to a year ago.
I have looked at all the sources for DTSS Elims like Mazdatrix, Racing Beat, Corksport but have not been able to find the exact ones I have.
I just want to be sure I have the right ones for my 88 T2 before changing them out.

 

sorry, double post

 

yes.they are the Right ones.The Bolt you have to take out is 21mm,and to "get a good Shot at it" the best way is to take the Rotor off the Hub assembly.Then afterwards you Bend the Dustshield back a bit and you can Clearly get at it with a Socket.The Damn Bolt will really be On there,so either have a good Impact gun or a Long Bar(about two footer or better!)..the OLD rubber Bushing you can Get out No problem,With a torch or whatever,But the Outer Part of that Bushing will have to Get PRESSED OUT,and That is a Hell of a Deal In itself!..you will need a Bit Of Patience,But Trust me,when I say that it is alot better than the Stock Toe Bushings!..Good Luck!..and If you need More Info Just Pm me.(I'm always willing to help out!)

 

Thanks for the conformation on this. I have links to a couple of different write-ups on doing this plus I had to pull a hub off my 86GXL because I broke a caliper mounting bolt off last year. I'll take the hubs to a shop to get the press work done if it looks like I will have a rough time getting the new one in. I plan to do this as I do a rear brake job later this week.

Do you know where these came from as in what company makes/supplies them?

 

yah i doing the same thing axle will not come out so i can get it to the press lol still trying