pinkfloyd

ok i know i want a 3in downpipe but there a many to choose from..here are some i am looking at(88t2). whitch one do you think i should get. thanks

http://66.216.67.51/product.asp?0=210&1=254&3=301
why dose the front of it look all flat is that good/bad or just dose not matter

http://66.216.67.51/product.asp?0=210&1=254&3=585
this one and the next one look like the same but one is 125$ and the other is 90$
http://66.216.67.51/product.asp?0=210&1=254&3=292

i dont get it.

NA_VersionFC3S

I got one from thunder fabrications for about $180. It was 3" and It was a 1 piece dp and cat-replacement pipe. There customer service was very nice and the shipping was fast. Product was great too.

Tim

NZConvertible

Check with a decent exhuast shop. It'll probably be cheaper to have one made.

Scott 89t2

first one is rip off

2nd one is 3"

3rd one is 2.5"

that's why it's different price.

the first thing you need to do is figure out what you want after it. the 3" will not bolt up to anything. the 2.5 might. or you might need the presilencer to bolt to the y pipe.

what is going after the downpipe? stock cat? you want a mid pipe? do you want to bolt to the stock cat back? buying a new cat back?

and no offence but with all your wiring questions. and they fact you are trying to put an turbo motor into an N/A. you will probably never get to the point of needed one....

Davidov

iTrader: (2)

Just get the racing beat full exhaust downpipe, its 3"(actually a litle bigger @ 80mm).

That way you can order the 3" steel flange from Racing Beat at the same time and have a exhaust shop weld something up to your downpipe.

JET

What material is the downpipe? They use to be heavy gauge mild steel, but vagely recall reading thay are stainless now.
Thanks JET

Ryde _Or_Die

http://corksport.com/main.php3?primN...tory59.content

http://corksport.com/main.php3?primN...tory59.content

1987RX7guy

iTrader: (3)

Yep take it slow and actuallly get the thing to work don't be buying upgrades for it yet.