does porting an engine shorten its life
02-06-03 | 07:43 PM
#26
fart on a friends head!!!
Joined: Mar 2002
Posts: 4,104
Likes: 1
From: sheppard AFB, TX
that jerk HAS no emissions testing!!!!!
injectors = id go with 1600s they are 105 new at the rx7store. . . you have to get a rail too, though. . . i believe. . . i might be thinking FD.
fuel pump = walbro 255 lph (around 100.00)
ems = haltech e6k brand new the cost is 1300.00. . . like i said, though, you might be able to get one in good shape off of someone going with the new e11
(if you go rebuild)
rotor seal kit = about 450
gasket kit = 120 or so. . . i think they are under 100.00 at www.rotaryaviation.com
rotorhousings (if yours are bad) = about 450.00 a piece maybe more. . . thats for a new housing. you might be able to find new ones or you might not. . . you can also go with the "scalliwag" coating (which is a very promising setup) for 300 a piece. i would like to go with that, but i have my rotorhousings.
anyways, just do some searching man. everybody here is gonna get the same prices that you get (unless they are a dealer). just go to the rotary store websites and look for what you need.
paul
injectors = id go with 1600s they are 105 new at the rx7store. . . you have to get a rail too, though. . . i believe. . . i might be thinking FD.
fuel pump = walbro 255 lph (around 100.00)
ems = haltech e6k brand new the cost is 1300.00. . . like i said, though, you might be able to get one in good shape off of someone going with the new e11
(if you go rebuild)
rotor seal kit = about 450
gasket kit = 120 or so. . . i think they are under 100.00 at www.rotaryaviation.com
rotorhousings (if yours are bad) = about 450.00 a piece maybe more. . . thats for a new housing. you might be able to find new ones or you might not. . . you can also go with the "scalliwag" coating (which is a very promising setup) for 300 a piece. i would like to go with that, but i have my rotorhousings.
anyways, just do some searching man. everybody here is gonna get the same prices that you get (unless they are a dealer). just go to the rotary store websites and look for what you need.
paul
