Does anyone have good settings for Profec B Spec II?
01-07-04, 04:47 PM
#1
Full Member
Thread Starter
Join Date: Nov 2001
Location: VA
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone have good settings for Profec B Spec II?
I have a Majestic Turbo upgraded turbo and ported wastegate.
Everyone seems to be running 0-3 gain, which seems like it slows the response down too much. Also, it seems like this would keep the controller from making corrections quickly.
I am going to the dyno soon and need to get the controller set right so I can work on fuel at the dyno.
My current settings are
start boost(set gain) - .34 or 8 psi
Gain - 3
Duty cycle 30%
This gives me about 10 psi
Thanks,
DMC
Everyone seems to be running 0-3 gain, which seems like it slows the response down too much. Also, it seems like this would keep the controller from making corrections quickly.
I am going to the dyno soon and need to get the controller set right so I can work on fuel at the dyno.
My current settings are
start boost(set gain) - .34 or 8 psi
Gain - 3
Duty cycle 30%
This gives me about 10 psi
Thanks,
DMC
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM