Do S5 blinkers work on S4 rx7s?
#28
OneThreeRotary
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: May 2006
Location: Vermont
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
The bulbs twist out but I can't get the socket out. Also For the life of me I cant get the JDM lenses to come off :X
.... I'm thinking that if I can't figure this out I might just wire my FTP up as driving lights... and If thats a problem I will Put a separate bulb into the S5 housing strictly for driving lights... I was just hoping that somebody was where I am now with these lenses.
.... I'm thinking that if I can't figure this out I might just wire my FTP up as driving lights... and If thats a problem I will Put a separate bulb into the S5 housing strictly for driving lights... I was just hoping that somebody was where I am now with these lenses.
#33
OneThreeRotary
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: May 2006
Location: Vermont
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Forget it guys... I know that the S4 blinkers don't fit the S5 bumper. I have a S4 and S5 bumper. My question was never will they fit, but "Can the S5 Blinkers be wired up to the S4 harness", But since my S5 blinkers seem to have a different connector than the USDM, and none of you have ever had this problem I will figure this out on my own. Thanks for the help.
#35
OneThreeRotary
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: May 2006
Location: Vermont
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
(S4) Well I imagine that they are both positives, one for each filament of the bulb.
and since the S5 uses a single filament bulb, it only has one positive wire.
and since the S5 uses a single filament bulb, it only has one positive wire.
#36
USDM S4 and S5 are alike in that Green/Black wire (left front) is for turn signals and hazards, Red/Black is for parking lights and of course Black is for the ground. How that differs from JDM who knows. Either they use the same wire for hazards, turn signals, driving lights or they only have two of the three possible functions.
#37
OneThreeRotary
![](https://www.rx7club.com/images/misc/05_year_icon.png)
Thread Starter
Join Date: May 2006
Location: Vermont
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Problem Solved... Bought clip in 194 bulbs and wired them up as driving lights and Kept the 1156 bulb as a blinker... worked perfectly, and only took like 15mins a light to do.
#38
DXW
![](https://www.rx7club.com/images/misc/15_year_icon.png)
iTrader: (3)
Join Date: Jan 2009
Location: Louisville, KY
Posts: 261
Likes: 0
Received 0 Likes
on
0 Posts
Hey,I'm planning to swap my s4 bumper to a s5 bumper. I bought the jspec ftp lights from corksport. Can u give me directions(step by step) on bolting up the bumper and wiring the lights? Do I need to have the s5 reinforce? Do I need the s5 light harness? What about the trim matching up?
Thread
Thread Starter
Forum
Replies
Last Post