do i need the atmospheric pressure sensor
#5
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 22 Likes
on
20 Posts
You'll find the Atmospheric pressure sensor inside the car....passengers side.......above the passengers feet. Not that you need to know that since it was that other thing that is melted...the boost/pressure sensor on the right hand strut tower.
You REALLY, REALLY need to make sure that you don't let any of the wires on the boost/pressure sensor touch each other or ground. A ECU can be ruined in a heartbeat if the ref voltage wire...brown/white ...is connected to the 12v black/white wire or is grounded. So if the electrical plug is also melted..be careful handling the wires.
You REALLY, REALLY need to make sure that you don't let any of the wires on the boost/pressure sensor touch each other or ground. A ECU can be ruined in a heartbeat if the ref voltage wire...brown/white ...is connected to the 12v black/white wire or is grounded. So if the electrical plug is also melted..be careful handling the wires.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
troym55
3rd Generation Specific (1993-2002)
23
05-25-16 12:42 PM
t-von
3rd Generation Specific (1993-2002)
9
09-10-15 01:56 PM